If a bathtub is provided, then it shall have the following features:
Search Results "Seat Location"
-
4.34.5.4 BATHTUBS
-
§ 38.125(d) Seating
(d) Seating—...
-
Sell-outs in specific seating areas. (Section-by-Section Analysis)
Under the second contingency, proposed § 36.302(f)(6)(ii), a facility could release unsold accessible seating in a specific seating area if all of the standard seats in that location were...
-
Sell-outs in specific seating areas. (Section-by-Section Analysis)
Under the second option, § 35.138(f)(2), a facility could release unsold accessible seating in a specific seating area once all of the standard seats in that location were sold out. ...
- Midmark Ritter 223 Barrier-Free® Power Examination Table
-
604.2 Location
604.2 Location. The water closet shall be positioned with a wall or partition to the rear and to one side....
-
809.2.1 Location
809.2.1 Location. At least one accessible route shall connect all spaces and elements which are a part of the residential dwelling unit....
-
502.3.4 Location
Access aisles shall be permitted to be placed on either side of the parking space except for angled van parking spaces which shall have access aisles located on the passenger side of the...
-
406.5 Location
Curb ramps and the flared sides of curb ramps shall be located so that they do not project into vehicular traffic lanes, parking spaces, or parking access aisles....
-
406.5 Location
Curb ramps and the flared sides of curb ramps shall be located so that they do not project into vehicular traffic lanes, parking spaces, or parking access aisles....
- Midmark Ritter 222 Barrier-Free® Power Examination Table
-
2.5.1 Location
Depending on the design and location, the intersection of two ORARs may act as a resting interval. Exception....
-
407.4.7.1.2 Location
407.4.7.1.2 Location. Raised character and braille designations shall be placed immediately to the left of the control button to which the designations apply....
-
M305.2.1.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M302.2 shall be located on the short side (length) opposite the transfer side....
-
221.2.1.1 General Seating
221.2.1.1 General Seating. Wheelchair spaces complying with 802.1 shall be provided in accordance with Table 221.2.1.1....
-
AMUSEMENT RIDE SEAT
[DSA-AC] A seat that is built-in or mechanically fastened to an amusement ride intended to be occupied by one or more passengers....
-
AMUSEMENT RIDE SEAT
[DSA-AC] A seat that is built-in or mechanically fastened to an amusement ride intended to be occupied by one or more passengers....
-
4. Wheelchair seat depth
Wheelchair seat depth For this study, wheelchair seat depth was calculated as the horizontal distance from the proximal (i.e., towards the rear) edge to the distal (i.e., towards the...
-
7. Seat Transfer
Are the roll-in showers free of doors that would impede wheelchair transfer onto the seat? [ADA Stds. 4.21.8] Yes __ No __ N/A __ Comments: _______________________________________...
-
Pushbutton locator tone
Pushbutton locator tone The pushbutton locator tone is a low-volume tick or tone that repeats constantly, at one-second intervals, during the flashing and steady DON’T WALK intervals...
- Midmark 625 Barrier-Free® Power Examination Table
-
Priority 3: Toilet Rooms
Word Fillable Form (2.4MB) Word Non-Fillable Form (2.2MB) PDF Non-Fillable Form (0.7MB)