The proposed rule would have required clear ground spaces to have slopes not steeper than 1:50 in any direction, and would have permitted slopes not steeper than 1:33 when necessary for...
Search Results "Permitted Transfer"
Filters
Commonly Searched Documents
-
Surface Slopes
-
Platform Lifts in Transient Lodging Guest Rooms and Dwelling Units
The 1991 Standards, at section 4.1.3(5), exception 4, and the 2010 Standards, at sections 206.7 and 206.7.6, both limit the locations where platform lifts are permitted to be used as part...
-
1002.4.4 Clearances
Where provided, securement devices shall be permitted to overlap required clearances. 2. Wheelchair spaces shall be permitted to be mechanically or manually repositioned. 3....
-
1002.4.4 Clearances
Where provided, securement devices shall be permitted to overlap required clearances. 2. Wheelchair spaces shall be permitted to be mechanically or manually repositioned. 3....
-
504.5 Nosings
Risers shall be permitted to slope under the tread at an angle of 30 degrees maximum from vertical....
-
New Construction
substitute cells to be made accessible within the same facility, which would permit correctional authorities to meet their obligation by providing the required accessible features in cells...
-
11B-304.4 Door swing
Doors shall be permitted to swing into turning spaces....
-
304.4 Door Swing
Doors shall be permitted to swing into turning spaces....
-
304.4 Door Swing
Doors shall be permitted to swing into turning spaces....
-
R408.3 Open Risers
Open risers are not permitted....
-
504.3 Open Risers
Open risers are not permitted....
-
11B-304.4 Door swing
Doors shall be permitted to swing into turning spaces....
-
11B-304.4 Door swing
Doors shall be permitted to swing into turning spaces....
-
Sargent 351 Series Aluminum Door Closer
Features ANSI/BHMA A156.4 Grade 1 Conforms to UL10C and UBC for positive pressure fire test 10-year warranty Versatile mounting applications permit standard, top jamb, parallel...
-
Tile Tech Pavers® Coral-Pave™
Any of our standard size options or custom sizes (order size permitting) above can be manufactured in this design....
-
Yale 51 Series Industrial Door Closer
• Standard, separate and independent, latch, sweep and backcheck intensity valves • 2-7/8" (73mm) projection • All standard arm applications allow doors to swing 180°, conditions permitting...
-
Tile Tech Pavers® Oceanic™ Series - Wave-Pave™
Any of our standard size options or custom sizes (order size permitting) above can be manufactured in this design....
-
Corbin Russwin Inc. DC5000 Series Cam Action Door Closer
The door closer's wide range of adjustable closing power permits use in the most demanding situations....
-
Johnny G KRANKcycle® Cross Trainer by Matrix
Narrow crank axis permits higher RPM and proper biomechanics. Adjustable Headstock Adjustable crank arm height encourages greater range of muscle activation....
-
1630.16(a)
A religious corporation, association, educational institution, or society is permitted to give preference in employment to individuals of a particular religion to perform work connected...
-
Track Crossing
The proposed rule required route surfaces to be level with the rail top, but permitted a 2 ½ inch gap at the inner edge of rails to accommodate wheel flanges (1003.2.7)....
-
R406 Reach Ranges (Section-by-Section Analysis)
The requirements for reach ranges differ from the 2004 ADA and ABA Accessibility Guidelines in that forward reach over an obstruction is not permitted, and side reach over an obstruction...
-
1002.4.4 Clearances
Where provided, securement devices shall be permitted to overlap required clearances. 2. Wheelchair spaces shall be permitted to be mechanically or manually repositioned. 3....
-
M301.4.2 Clearance Around Base
The width of the base permitted within this clearance shall be 26 inches (660 mm) wide maximum at the edge of the examination surface and shall be permitted to increase at a rate of 1 inch...
