[See subsections ...]
Search Results "Parallel Curb Ramp"
Filters
Commonly Searched Documents
-
Solutions for Accessibility: Problems Involving Ramps
-
1118B.4
The minimum clear floor or ground space for wheelchairs may be positioned for forward or parallel approach to an object....
-
11B-303.3 Beveled
Changes in level exceeding ½ inch (13 mm) must comply with 405 (Ramps) or 406 (Curb Ramps). FIGURE 11B-303.3 BEVELED CHANGE IN LEVEL...
-
303.3 Beveled
Changes in level exceeding ½ inch (13 mm) must comply with 405 (Ramps) or 406 (Curb Ramps). Figure 303.3 Beveled Change in Level...
-
A4.6.3 Parking Spaces
The parking access aisle must either blend with the accessible route or have a curb ramp complying with 4.7....
-
Appendix B: Overview of Federal Regulations and Guidance for Detectable Warnings
The ADAAG requires detectable warnings on the full surface of curb ramps. In 1994 the USDOJ, USDOT, and U.S....
-
308.3.1 Unobstructed
Where a clear floor or ground space allows a parallel approach to an element and the side reach is unobstructed, the high side reach shall be 48 inches (1220 mm) maximum and the low side...
-
CLASS ACTION ALLEGATIONS
ramps; e....
-
Passenger Drop-off Locations
If a curb separates the access aisle from an accessible route, a curb ramp must be provided so that people with disabilities can get to the accessible route leading to the accessible entrance...
-
Chapter 4: Accessible Routes
Chapter 4 contains technical requirements for accessible routes (402) and the various components of such routes, including walking surfaces (403), doors, doorways and gates (404), ramps...
-
303.3 Beveled
Changes in level exceeding 1/2 inch (13 mm) must comply with 405 (Ramps) or 406 (Curb Ramps)....
-
Components (R302.2) (Section-by-Section Analysis)
Curb ramps and blended transitions must comply with the technical requirements in R302.7 and R304. Ramps must comply with the technical requirements in R407....
-
Running Slope
The slope that is parallel to the direction of travel (see cross slope)....
-
Problem Two
Solution: Use traffic cones to mark and block off the access aisle and curb ramp area. ...
-
Problem Four
Cones mark the access aisle and a temporary curb ramp with edge protection connects to an accessible route to the polling place....
-
11B-206.2.1 Site arrival points
.) ◼ [ADA Title II] §35.151(i) New Construction and Alterations; Curb Ramps....
-
308.3.1 Unobstructed
Where a clear floor or ground space allows a parallel approach to an element and the side reach is unobstructed, the high side reach shall be 48 inches (1220 mm) maximum and the low side...
-
11B-303.3 Beveled
Changes in level exceeding 1/2 inch (13 mm) must comply with Sections 11B-405 (Ramps) or 11B-406 (Curb Ramps). ◼ ...
-
1. Public Right-of-Way
Kirola further testified that she encountered a corner with only one curb ramp (as opposed to bi-directional ramps) at the intersection of McAllister and Fillmore, but did not submit a complaint...
-
11B-308.3.1 Unobstructed
Where a clear floor or ground space allows a parallel approach to an element and the side reach is unobstructed, the high side reach shall be 48 inches (1219 mm) maximum and the low side...
-
R105 Definitions (Section-by-Section Analysis)
The proposed guidelines define the following terms: accessible, alteration, blended transition, cross slope, curb line, curb ramp, element, facility, grade break, operable part, pedestrian...
-
THE SETTLEMENT CLASS
at any time from the beginning of time through the thirty-year term of the Settlement Agreement: (1) accessed or attempted to access any sidewalks, intersections, crosswalks, streets, curbs...
-
RUNNING SLOPE
[DSA-AC] The slope that is parallel to the direction of travel. (As differentiated from the definition of “Cross Slope”.)...
-
Baseline
surfaces on curb ramps All state transportation departments currently specify detectable warning surfaces on curb ramps in their standard drawings; most local transportation departments...