Every required area of refuge shall have direct access to an enclosed stairway complying with Sections 1003.2.13.2 and 1005.3.2 or an elevator complying with Section 1003.2.13.3....
Search Results "Operation (Elevator)"
-
1003.2.13.5 Areas of refuge
-
407.4.8.1.1 Size
Characters shall be ½ inch (13 mm) high minimum.
-
11B-407.4.8.1.1 Size
Characters shall be ½ inch (12.7 mm) high minimum.
-
407.4.8.1.1 Size
Characters shall be 1/2 inch (13 mm) high minimum.
-
407.4.8.1.1 Size
407.4.8.1.1 Size. Characters shall be ½ inch (13 mm) high minimum.
-
11B-407.4.8.1.1 Size
Characters shall be ½ inch (12.7 mm) high minimum.
-
11B-407.4.8.1.1 Size
Characters shall be ½ inch (12.7 mm) high minimum.
-
§ 38.123(a)(5)
Door latches and hardware shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist....
-
HOGGAN Wireless Dynamometer ergoFET500 Heavy Push/Pull Force Gauge
With two operating test modes, four selectable threshold settings, and force readings in pounds (lbs), kilogram-force (kgf), or Newtons (N), the ergoFET500 is a highly versatile force gauge...
-
10.3.1(17)
(17) Where provided, elevators shall be glazed or have transparent panels to allow an unobstructed view both in to and out of the car. Elevators shall comply with 4.10....
-
Door and Signal Timing for Hall Calls [4.10.7], Door Delay for Car Calls [4.10.8]
Timing, based on the distance between the farthest call button and the elevator door, begins with visible and audible signaling of car arrival....
-
§ 38.127(c)
(c) Controls and operating mechanisms (e.g., heating and air conditioning controls, lighting controls, call buttons, electrical outlets, etc.) shall be mounted no more than 48 inches, and...
-
407.2.1.4 Location
EXCEPTION: Destination-oriented elevators shall not be required to comply with 407.2.1.4. Advisory 407.2.1.4 Location, Exception....
-
407.2.1.4 Location
EXCEPTION: Destination-oriented elevators shall not be required to comply with 407.2.1.4. Advisory 407.2.1.4 Location Exception....
-
407.2.1.4 Location
EXCEPTION: Destination-oriented elevators shall not be required to comply with 407.2.1.4. Advisory 407.2.1.4 Location Exception....
-
Maintenance of Accessible Features
Maintenance of Accessible Features Accessible pool features must be maintained in operable, working condition so that persons with disabilities have access to the pool whenever the pool...
-
408.1 General
Limited-use/limited-application elevators shall comply with 408 and with ASME A17.1 (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
408.1 General
Limited-use/limited-application elevators shall comply with 408 and with ASME A17.1 (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
Norton Surface Mounted 7100SZ Series SafeZone® Electromechanical Closer
open time and sensitivity Push or pull side mounting Handed units Spring sizes 3, 4 or 5 (models 7110SZ and 7150SZ); spring sizes 2, 3, 4 or 5 (models 7120SZ and 7130SZ) Fail safe operation...
-
11B-407.2.1.4 Location
Destination-oriented elevators shall not be required to comply with 407.2.1.4. Advisory 11B-407.2.1.4 Location Exception....
-
§27.71(b)
(b) Airport operators shall ensure that the terminal facilities and services subject to this section shall be readily accessible to and usable by individuals with disabilities, including...
-
1012.3 Opening limitations
At elevated walking surfaces for access to and use of electrical, mechanical or plumbing systems or equipment, guards shall have balusters or be of solid materials such that a sphere with...
-
4.27.3* Height
The highest operable part of controls, dispensers, receptacles, and other operable equipment shall be placed within at least one of the reach ranges specified in 4.2.5 and 4.2.6....
-
Trash, Recycling, and Other Essential Containers
Ensure controls and operating mechanisms for containers comply with the technical requirements for reach ranges and operability specified in ABAAS, sections 308 and 309, and explained in...
