Transfer devices for use with amusement rides shall comply with 1002.6 when positioned for loading and unloading. Advisory 1002.6 Transfer Devices for Use with Amusement Rides....
Search Results "Horizontal Position"
Commonly Searched Documents
-
Transfer Devices for Use with Amusement Rides: ADA Standard Section 1002.6
-
11B-1002.6 Transfer devices for use with amusement rides
Transfer devices for use with amusement rides shall comply with Section 11B-1002.6 when positioned for loading and unloading....
-
11B-405.7.5 Doorways
Doors, in any position, shall not reduce the minimum dimension of the ramp landing to less than 42 inches (1067 mm). [2010 ADA Standards] 405.7.5 Doorways....
- ElectionSource Voter Accessibility Expansion Door Hinge
-
Background
In order to obtain a quality image with the needed visualization of the breast tissue, a patient’s ability to approach and position next to the machine is vital....
-
604.4 Seats
Seats shall not be sprung to return to a lifted position. EXCEPTIONS: 1....
-
604.4 Seats
Seats shall not be sprung to return to a lifted position. EXCEPTIONS: 1....
-
604.4 Seats
Seats shall not be sprung to return to a lifted position. EXCEPTIONS: 1....
-
4.6.1 General
The other telescopes shall be usable from a standing position. Telescopes or periscopes at different heights can be mounted separately or on a single pedestal. Exception....
-
604.4 Seats
Seats shall not be sprung to return to a lifted position. EXCEPTIONS: 1....
-
III. Handrails and Stanchions
stanchions for rapid, light, and commuter rail vehicles, consideration should be given to the proximity of handrails or stanchions to the area in which wheelchair or mobility aid users may position...
-
11B-604.5.1 Side wall
grab bar shall be 42 inches (1067 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1372 mm) minimum from the rear wall with the front end positioned...
- The Challenges EV Charging for People with Disabilities
-
Slopes and Resting Intervals for Outdoor Recreation Access Routes
Slopes are often described as a ratio of vertical distance to horizontal distance, or rise to run....
-
Diagonal Curb Ramps
Comments noted that this segment of curb does not have to be horizontally straight to provide such a cue and that achieving straight segments two feet long within marked crossings is very...
-
1117B.5.5, Item 4
Characters and Braille shall be in a horizontal format....
-
R210.3 Shared Use Paths
The AASHTO Guide recommends that fixed objects should not be permitted to protrude within the vertical or horizontal clearance of a shared use path....
-
4.9.4 HANDRAILS
At the bottom, the handrail shall continue to slope for a distance of the width of one tread from the bottom riser; the remainder of the extension shall be horizontal (see Fig. 19(c) and...
-
1013.4 Raised character and braille exit signs
Each exit door through a horizontal exit that is required to comply with Section 1013.1, shall be identified by a sign with the words, “TO EXIT.”...
- Endorphin 325 Functional Wall Pulley
- Ferno's EZ Glide® Evacuation Stair Chair
- American Standard Colony Choice 1-Handle Kitchen Faucet 4175.700
- Stanley Access Technologies Dura-Care 7000 Manual Door System