(b) Each accessible compartment shall contain a restroom complying with §38.123(a) which can be entered directly from such compartment.
Search Results "Golf Car Rental Area"
Filters
Commonly Searched Documents
-
§ 38.127(b)
-
§ 38.117(b)
(b) All step edges and thresholds shall have a band of color(s) running the full width of the step or threshold which contrasts from the step tread and riser or adjacent floor,...
-
§ 38.111(b)
(b)
-
§ 38.123(b)
(b) Restrooms required to be accessible shall be in close proximity to at least one seating location for persons using mobility aids complying with §38.125(d) of this part and shall...
-
§ 38.93(d)(2) Exception
(2) Exception. New vehicles operating in existing stations may have a floor height within plus or minus 11/2 inches of the platform height. At key stations, the horizontal gap...
-
11B-407.4.8.2.2 Signal level
The verbal annunciator shall be 10 dB minimum above ambient, but shall not exceed 80 dB, measured at the annunciator.
-
11B-411.4.7.3 Symbols
The control button for the emergency stop, alarm, door open, door close, and phone, shall be identified with raised symbols and Braille as shown in Table 11B-407.4.7.1.3.
-
11B-411.3.4 Door delay
Door delay shall comply with Section 11B-407.3.5.
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
405.1 General
EXCEPTION: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with 405....
-
F245.4.2 Routes to and within Common Use and Public Use Areas
This section requires at least one outdoor recreation access route to connect each picnic unit with mobility features with common use and public use areas serving the unit; and at least...
-
Notification: ADA Standard Section 809.5.5.1
Where visible doorbell signals are located in sleeping areas, they shall have controls to deactivate the signal....
-
11B-809.5.5.1 Notification
Where visible doorbell signals are located in sleeping areas, they shall have controls to deactivate the signal....
-
A. Passenger Drop-Off Areas
Passenger Drop-Off Areas During an evacuation the most efficient method of transporting people to shelters likely will include using vans and buses....
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-405.1 General
Exception: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with Section 11B-405....
-
11B-405.1 General
Exception: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with Section 11B-405....
-
11B-405.1 General
Exception: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with Section 11B-405....
-
4.3.11.4* Two-way Communication
A method of two-way communication, with both visible and audible signals, shall be provided between each area of rescue assistance and the primary entry....
-
11B-221.2.1 Number and location
Wheelchair spaces shall be provided complying with Section 11B-221.2.1.
-
11B-1008.2.6.1 Accessibility
Ground surfaces shall comply with ASTM F 1951. Ground surfaces shall be inspected and maintained regularly and frequently to ensure continued compliance with ASTM F 1951.
-
11B-1008.2.5.3.2 Handrail height
The top of handrail gripping surfaces shall be 20 inches (508 mm) minimum and 28 inches (711 mm) maximum above the ramp surface.