If there is no level space between ramps, wheelchairs can "bottom out" or "high center" while proceeding down one ramp while the back wheels are coming up the other slope....
Search Results "Cross Slope"
-
Islands [4.7.11]
-
4.9.4(2)
At the bottom, the handrail shall continue to slope for a distance of the width of one tread from the bottom riser; the remainder of the extension shall be horizontal (see Fig. 19(c) and...
-
2.3.1
For example, specifications may include limits on the number of local variations (dips and humps) on an accessible ramp to a maximum of 10 percent slope for no more than 20 percent of the...
-
Surface and Size [§305.2 and §305.3]
They must be free of level changes and not slope more than 1:48. The minimum size (30” by 48”) applies whether the space is positioned for forward or side approaches....
- Weizel Security 826-S74 SR™ Partition Door
- Corbin Russwin Inc. BLSS Trim Lever Handle & Lockset
- AJW Architectural Products U591 1.6 Gallon Sanitary Napkin Disposal - Surface Mounted
-
11B-221.2.3.2 Vertical dispersion
Points of entry to bleacher seating may include, but are not limited to, cross aisles, concourses, vomitories, and entrance ramps and stairs....
-
11B-221.2.3.2 Vertical dispersion
Points of entry to bleacher seating may include, but are not limited to, cross aisles, concourses, vomitories, and entrance ramps and stairs....
-
What is slip resistance?
Materials which might be suitable for level surfaces may be inappropriate for sloping surfaces; materials specified for dry conditions may be unsafe when it rains; a leather shoe may perform...
-
Tent Pads and Tent Platforms
Do not allow the slope of an accessible tent pad or platform to exceed 1:48 (2 percent) in any direction, except when the surface isn't paved or built with boards, the slope may be up to...
-
Trailhead Information Signs [F216.13 and 1017.10]
Length of the trail or trail segment Type of trail surface Typical and minimum trail tread width Typical and maximum trail grade Typical and maximum trail cross...
-
Getting From Here to There—Outdoor Recreation Access Routes
Design outdoor recreation access routes to meet technical requirements for running and cross slopes, resting intervals, surface, clear tread width, passing spaces, tread obstacles, protruding...
-
F - number system
Although it was developed to measure level floors, it can be used measure sloped floors. For slabs - on - grade the F - numbering system works well....
- Armor-Tile Tactile Systems Surface Applied Systems
- Tork Elevation® Matic® Hand Towel Roll Dispenser, Black
- Georgia-Pacific enMotion® Automated Touchless Soap and Sanitizer Dispenser
-
Conditions for Exceptions [1019]
For example, where a trail is constructed in a steeply sloped area, compliance with the running slope provision may not be practicable on parts of the trail where it would require extensive...
-
Clear Width [1018.4]
The clear width of beach access routes that are not removable can be reduced to a minimum of 48 inches at dune crossings....
-
Small governmental jurisdictions affected by proposed accessibility guidelines
., sidewalks, pedestrian street crossings, and pedestrian signals)....
-
11B-302.3 Openings
Clearance|_, 11B-409.4.3 _|Platform to Hoistway Clearance|_, 11B-410.4 _|Platform to Runway Clearance|_, 11B-810.5.3 _|Platform and Vehicle Floor Coordination|_ and 11B-810.10 _|Track Crossings...
-
§ 38.23(c)(8) Handrails
The handrail shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less...
-
§ 38.95(c)(8) Handrails
The handrail shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less...
-
§ 38.83(c)(8) Handrails
The handrail shall have a cross- sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have “eased” edges with corner radii of not less...