The Committee recommends transfer supports not rotate when locked in place for patient transfer or use....
Search Results "Cast-in-Place"
Filters
Commonly Searched Documents
-
5.4.10 Transfer Support Fittings Recommendations for M301 and M302
-
§27.127(e)(1)
a government employee considered to be on official business) who, having been invited or requested to appear and testify as a witness on the government's behalf, attends at a time and place...
-
Identification of accessible guest rooms. (Section-by-Section Analysis)
This requirement is integral to ensuring that individuals with disabilities receive the information they need to benefit from the services offered by the place of lodging. ...
-
206.3 Location
Department of Transportation regulation 49 CFR 37.21, elements such as ramps, elevators, or other circulation devices, fare vending or other ticketing areas, and fare collection areas shall be placed...
-
604.8.1.2 Doors
A door pull complying with 404.2.7 shall be placed on both sides of the door near the latch. Toilet compartment doors shall not swing into the minimum required compartment area....
-
604.3.2 Overlap
When the door to the toilet room is placed directly in front of the water closet, the water closet cannot overlap the required maneuvering clearance for the door inside the room. ...
-
§35.130(f) (Section-by-Section Analysis)
Paragraph (f) provides that a public entity may not place a surcharge on a particular individual with a disability, or any group of individuals with disabilities, to cover any costs of measures...
-
1.1.3.2, Item 14.1
Theater, dancehall, skating rink, auditorium, assembly hall, meeting hall, nightclub, fair building or similar place of assemblage where 50 or more persons may gather together in a building...
-
E102.2 ANSI/HFES (Section-by-Section Analysis)
This standard provides ergonomic guidance and specifications for the design of accessible software for use at work, in the home, in educational settings, and in public places....
-
Accessible Transient Lodging [9]
In the case of the private sector, other types of residential facilities, such as apartment buildings, are not subject to the ADA (except for places of public accommodations within them,...
-
Location [4.6.2] and Dispersion
For example, spaces for an out-lying lot can be placed in a lot closer to the building served since accessible spaces must be located on the shortest accessible route to an accessible facility...
-
A4.1.1(3) Areas Used Only by Employees as Work Areas
Consideration should also be given to placing shelves in employee work areas at a convenient height for accessibility or installing commercially available shelving that is adjustable so...
-
Clear Floor Space [4.35.2]
Placing the bench in a corner will allow the walls to be used as support or as a backrest....
-
2.4.4.1. Repair Costs
Captioning and audio description hardware is typically mounted high on a wall in a movie theater auditorium or otherwise placed in the projection booth. ...
-
Managing Question and Answer / Audience Participation
When microphones are not available: Place blank cards and pens on each table and tell attendees in advance to use these to write down their questions....
-
Chapter 1: Laying the Foundation: Disability Policy & Activism, 1968-1988
Without this foundation, which was put in place largely over the 1970s and 1980s, the ADA’s passage would have been impossible....
-
4.1.2(18)
(18) Assembly areas: (a) If places of assembly are provided, they shall comply with the following table: Capacity of Seating & Assembly Areas Number of Required...
-
Signage
Where there is no wall space to the latch side of the door, including at double leaf doors, signs shall be placed on the nearest adjacent wall....
-
18) Elevators and platform lifts in new construction and alterations
18) Elevators and platform lifts in new construction and alterations ADAAG: The elevator exemption for two-story places of public accommodation or commercial facilities does not apply...
-
11B-705.2 Detectable directional texture
This surface will be placed directly behind the yellow detectable warning texture specified in Section 11B-705.1.2.1, aligning with all doors of the transit vehicles where passengers will...
-
Norton Surface Mounted Light Duty 210 Series Door Closer
installation and maintenance and dependable control, the 210 is perfect for office doors, utility doors and strip mall applications Features: Adjustable spring size 1-6 Non-handed Cast...
-
Mansfield Erie Commercial Package Toilet CP-1301
handle with sealed handle package Vandal resistant torqued stop cap High back pressure vacuum break flush connection Spud coupling and flange for 1-1/2 top spud Chrome-plated copper casting...
-
Sargent 1130 Series Door Closer
Features Full rack and pinion High strength cast aluminum case Tri-packed for versatile mounting: standard, inverted or parallel Arm leverage adjustment One piece spindle heat...
-
Cal-Royal Hydraulic Door Closers 400 Series
Rack and pinion operation contained in a high tensile precision cast aluminum housing for the highest quality....
