Door equipped with full-length stainless steel piano-hinge at bottom; swings down for easy filling. Rough Wall Opening: 11 1/4" W, 15 5/8" H, 4" min. depth (285 x 395 x 100mm)....
Search Results "Swing Grab Bar"
- Bobrick ClassicSeries Recessed Paper Towel Dispenser B-359
-
III-7.8200 Restaurants and cafeterias
ADAAG contains requirements for counters and bars, access aisles, food service lines, tableware and condiment areas, raised speaker's platforms, and vending machine areas (but not controls...
-
Threshold Height
An exception in original ADAAG that allowed a ¾ inch threshold at exterior sliding doors was removed in the proposed rule because products are available, including swinging doors, that meet...
-
604.8.1.2 Doors
Toilet compartment doors shall not swing into the minimum required compartment area. [ECTCR UFAS 4.17.5] Figure 604.8.1.2 Wheelchair Accessible Toilet Compartment Doors...
-
703.4.2 Location
characters shall be located so that a clear floor space of 18 inches (455 mm) minimum by 18 inches (455 mm) minimum, centered on the tactile characters, is provided beyond the arc of any door swing...
-
Clear Floor Space [4.35.2]
Space is important so that users can turn around and exit through swinging or sliding doors. Benches can overlap turning space where clearance (9 inches minimum) is available for toes....
-
Limited-Use/ Limited-Application Elevators [§408]
Besides car size, provisions for LULAs differ from those of §407 in that: Hoistway doors can be swinging type (they must open and close automatically, be power-operated, meet requirements...
-
Signage
Mounting location for such signage shall be so that a person may approach within 3 in (76 mm) of signage without encountering protruding objects or standing within the swing of a door....
-
604.8.1.2 Doors
Toilet compartment doors shall not swing into the minimum required compartment area. Figure 604.8.1.2 Wheelchair Accessible Toilet Compartment Doors ...
-
703.4.2 Location
characters shall be located so that a clear floor space of 18 inches (455 mm) minimum by 18 inches (455 mm) minimum, centered on the tactile characters, is provided beyond the arc of any door swing...
-
1010.1.9.7 Delayed egress locks
For doors that swing in the direction of egress, the sign shall read: KEEP PUSHING. THIS DOOR WILL OPEN IN 15 [30] SECONDS....
-
ASME
The enclosure walls not used for entry or exit are required to have a grab bar the full length of the wall on platform lifts....
-
11B-104.1.1 Construction and manufacturing tolerances
Where the requirement states a specified range, such as in Section 11B-609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate...
-
11B-104.1.1 Construction and manufacturing tolerances
Where the requirement states a specified range, such as in Section 11B-609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate...
-
Measuring Door Openings
Door handles and push bars should not be included in the measurements of door opening widths....
- Aluminum Heavy Duty Wheels n' Heels® Metro Grating
- Aluminum Dove Tail Series Pressure-Locked Grating
- Kompan, Inc. Vega GXY8017
- Seton EZ-Roll Sign Stanchion Systems - Parking Sign PP244
-
902.1 General
Dining surfaces include, but are not limited to, bars, tables, lunch counters, and booths....
-
902.1 General
Dining surfaces include, but are not limited to, bars, tables, lunch counters, and booths....
- Hill-Rom Sabina® II Mobile Lift
-
1133B.2.5.2
Latching and locking doors that are hand-activated and which are in a path of travel shall be operable by lever-type hardware, panic bars, push-pull activating bars, U-shaped handles or...
- Allegion LCN 1260 Series Surface Mounted Door Control