Water Infiltration ASTM-E 547 4.5 psf DP 30 No Leakage No Leakage Uniform Load Deflection ASTM-E 330...
Search Results "Occupant Load"
Commonly Searched Documents
- LaCantina Folding Wood Door System
-
11B-202.3 Alterations
Chapter 2, Section 202 defines alteration as “…a change, addition or modification in construction, change in occupancy or use, or structural repair to an existing building or facility. …...
- Texas Board of Architectural Examiners (TBAE)
-
Stowage of Wheelchairs and Mobility Aids
Wet cell batteries which are not non-spillable may require removal from the wheelchair if the wheelchair cannot be loaded and stowed in an upright condition and secured against movement...
-
Observations and Results
Because this system failed prematurely due to mechanical loads, it did not remain in place long enough to confirm its ability to control trail erosion....
-
[2010 ADAS] 105.2.5 NFPA
Systems equipped with alarm verification features shall be permitted under the following conditions: (1) The alarm verification feature is not initially enabled unless conditions or occupant...
-
How to Use This Pocket Guide
., hotels, motels, and boarding houses) is classified as a residential occupancy (4.1.4(11)(a))....
-
Incorporation of Guidelines for Play Areas and Recreation Facilities
While the Board has otherwise sought to avoid technical chapters that are based solely on an occupancy type, it has located the technical provisions of the play areas and recreation facilities...
- Allegion Falcon RU/RW Series Mechanical Locks
- ADA Veracity ADA Pro Application
- LaCantina Contemporary Aluminum Bifold Door System
-
Issue 13: How can energy codes and LEED™ “Points” be made compatible with lighting design criteria that accommodate low vision persons?
Those spaces are infrequently used and, in Oregon you have to have controls - like occupancy-sensors - so when someone leaves, the lights do go off....
-
7.3 Imaging System Accessibility Configuration Examples and Concerns
The wheels would lock and the base is sufficiently robust and sized for appropriate loadings. The support could be made to be height adjustable....
-
Section 36.406(e) Housing at a Place of Education
Some are double-occupancy rooms with a shared toilet and bathing room, which may be inside or outside the unit....
-
203.9 Employee Work Areas
In addition, other provisions in section 203 exempt spaces or structures that may function as work areas, such as raised areas, limited access spaces, machinery spaces, and single occupant...
-
NFPA
Systems equipped with alarm verification features shall be permitted under the following conditions: 1) The alarm verification feature is not initially enabled unless conditions or occupant...
-
§ 382.21 Aircraft accessibility
unable to reach the lavatory from a seat without the use of an on-board wheelchair.1 (iii) On-board wheelchairs shall include footrests, armrests which are movable or removable, adequate occupant...
-
Studies of Wheeled Mobility Devices and Transferring Abilities
The height was measured as the vertical distance from the floor to the lowest point of the seating surface of the mobility device, while the occupant was seated in the device....
-
Can People with Limited Mobility Use the Usable Circulation Path by Themselves?
The majority of recommendations led to the formation of two new ASME task groups: the Use of Elevators by Fire Fighters task group and the Use of Elevators for Occupant Egress task group...
-
XI. Overview of Americans with Disabilities Act Accessibility Guidelines for New Construction and Alterations
An accessible route must connect accessible public transportation stops, parking spaces, passenger loading zones, and public streets or sidewalks to all accessible features and spaces within...
-
3. Stowage Space for Wheelchairs
This is a more important consideration than ever, given frequently high load factors on many flights....
-
A MINIMUM HIGHEST POINT STANDARD OF 19 INCHES IS CONSISTENT WITH EXISTING ACCESSIBILITY STANDARDS
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area.16 As...