Model UT Side Accessible Picnic Tables are designed for most public applications. Built rugged, but with less weight, easier to move. A section of seating is removed from the...
Search Results "Fire-Building Surface"
Filters
Commonly Searched Documents
-
Pilot Rock UT Series Side Accessible Picnic Table Using Recycled Plastic
-
Belson Outdoors Recycled Plastic Universal Access Picnic Table
This traditionally styled picnic table with it's step over design is made of 100% recycled plastic, giving it a modern resistance to weather. The heavy-duty 4" x 6" legs provide the...
-
KirbyBuilt Providence Walk-Thru Picnic Table
Convenient walk-thru design accommodates 1 wheelchair. Tabletop & Seats: Plastic - injection molded, ribbed & reinforced Tabletop Length: 8 ft. Frame: Recycled...
-
907.2.6.1 Group I-2
Corridors in nursing homes (both intermediate care and skilled nursing facilities), detoxification facilities and spaces open to the corridors shall be equipped with an automatic fire detection...
-
4.3.3 Slope
When the surface is not paved or is not elevated above the natural ground, slopes not steeper than 1:33 (3 percent) shall be permitted where necessary for drainage. ...
-
Bon® Tool Co. Aloha Slope Checker
1-1/2" x 3-1/2" aluminum Comfort grip handles Removable digital reading inclinometer Includes mounting bracket and inclinometer (#21-121) Made in USA
-
405.3 Cross Slope
Cross slope is the slope of the surface perpendicular to the direction of travel. Cross slope is measured the same way as slope is measured (i.e., the rise over the run)....
-
1.5 Materials
Four different colors of simulated sidewalk surfaces were used in this study....
-
2010 ADA Standards - Plan Review Tool - Slopes
2010 ADA Standards - Plan Review Tool - Slopes Click here to view/download the pdf "2010 ADA Standards - Plan Review Tool - Slopes" (774 KB) * * * * * * *
-
M305.2.5 Surface Hazards (Section-by-Section Analysis)
No public comments were submitted on this issue, but the MDE Advisory Committee voiced concern about surface hazards stating, “gripping surface configurations must provide an effective and...
-
1017.6 Openings
Openings in the surface of trails, passing spaces, and resting intervals shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1017.6 Openings. ...
-
1133A.4.1 Exceptions
Two 15-inch (381 mm) wide minimum breadboards may be provided in lieu of the required 30 inches (762 mm) of countertop work surface, and used without meeting the repositioning requirements...
-
1017.6 Openings
This section requires openings in the surface of trails, passing spaces, and resting intervals such as spaces between the boards in a boardwalk to not allow passage of a sphere more than...
-
1017.6 Openings
Openings in the surface of trails, passing spaces, and resting intervals shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1017.6 Openings....
-
5.1.1 Transfer Surface Height Adjustability
5.1.1 Transfer Surface Height Adjustability. The transfer surface should have an adjustable height in small virtually continuous increments....
-
5.1.2 Transfer Surface High Height
5.1.2 Transfer Surface High Height. The transfer surface should have an adjustable height range with an upper height measuring at least 25 inches....
-
IBC Comparison
This document provides a comparison between the updated ADA Accessibility Guidelines, the original ADA Standards, and the International Building Code (2003 edition)....
-
Directional Signs: ADA Standard Section 216.4.3
Section 216.4.3 covers scoping requirements in the current ADA Standards for directional signs.
-
Beneficial Designs The Universal Trail Assessment Process (UTAP)
Illustrated step-by-step instructions show how to use each assessment tool, how to accurately measure grade, cross slope , width, and obstacles and how to describe surface type....
-
National Network of ADA Centers
The height of the transfer surface during patient transfer shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured from the floor to the top of the transfer surface....
-
11B-804.3 Kitchen work surface
In residential dwelling units required to comply with Section 11B-809, at least one 30 inches (762 mm) wide minimum section of counter shall provide a kitchen work surface that complies...
-
11B-813.2.1.2 Clearance
Floor or ground surfaces of clearances shall comply with Section 11B-302. Changes in level are not permitted....
-
Built-in Elements
BUILT-IN ELEMENTS Dining/work surfaces 11B-226, 11B-902.2 Benches 11B-903.2...
