When the floor surface is constructed of asphalt, concrete, or boards, the slope of the floor surface must be no steeper than 1:48 (2 percent) in any direction, regardless of the type of...
Search Results "Detectable Directional Texture"
Filters
Commonly Searched Documents
-
Floor [1014.3]
-
R304.2.1 Turning Space
The 1.5 m (5.0 ft) dimension shall be provided in the direction of the ramp run....
-
R304.3.1 Turning Space
The 1.5 m (5.0 ft) dimension shall be provided in the direction of the pedestrian street crossing....
-
907.2.6.2.2 Manual fire alarm boxes
Manual fire alarm boxes are not required to be located in accordance with Section 907.3 where the fire alarm boxes are provided at staff-attended locations having direct supervision over...
-
Minimal protection.
minimal protection" from its regulation, the Department continues to believe that the language serves the important function of excluding from coverage so-called "attack dogs" that pose a direct...
-
1607A.8.2 Grab bars, shower seats and dressing room bench seats
Grab bars, shower seats and dressing room bench seat systems shall be designed to resist a single concentrated load of 250 pounds (1.11 kN) applied in any direction at any point on the grab...
-
304.3.2 T-Shaped Space
Each arm of the T shall be clear of obstructions 12 inches (305 mm) minimum in each direction and the base shall be clear of obstructions 24 inches (610 mm) minimum....
-
4.6.6 Passenger Loading Zones
Vehicle standing spaces and access aisles shall be level with surface slopes not exceeding 1:50 (2%) in all directions....
-
Other Requirements [4.11.2]
Questions on the ASME standard should be directed to the American Society of Mechanical Engineers at (212) 705‒8500....
-
Extensions
For extensions to provide this support, they must be in line with the direction of travel on the stairs....
-
4.3.11.5 Identification
Signage shall also be installed at all inaccessible exits and where otherwise necessary to clearly indicate the direction to areas of rescue assistance....
-
4.6.3* Parking Spaces
Parking spaces and access aisles shall be level with surface slopes not exceeding 1:50 (2%) in all directions....
-
4.8.4 LANDINGS
(3) If ramps change direction at landings, the minimum landing size shall be 60 in by 60 in (1525 mm by 1525 mm)....
-
304.3.2 T-Shaped Space
Each arm of the T shall be clear of obstructions 12 inches (305 mm) minimum in each direction and the base shall be clear of obstructions 24 inches (610 mm) minimum....
-
Assistive Technology Act of 2004
Among other things, it requires states to provide direct aid to people with disabilities to ensure they have access to the technology they need, at both home and work, and authorizes the...
-
1016.6 Openings
Elongated openings should be placed so that the long dimension is perpendicular, or as close to perpendicular as possible, to the dominant direction of travel....
-
Are accessible spaces required on all levels of a multi-level parking structure?
However, where a parking facility has entrances/exits or direct connections to an adjacent building on multiple levels, standard accessible spaces must be dispersed among accessible entrances...
-
1.1.7.3.1 Detached one- and two-family dwellings
Residential Code, but not both, unless the proposed structure(s) or element(s) exceed the design limitations established in the California Residential Code, and the code user is specifically directed...
-
23. Extreme Weather Assistance
request to be assisted from his or her door to a vehicle during extreme weather conditions should generally be granted so long as the driver leaving the vehicle to assist would not pose a direct...
-
1607A.8.2 Grab bars, shower seats and dressing room bench seats
Grab bars, shower seats and dressing room bench seat systems shall be designed to resist a single concentrated load of 250 pounds (1.11 kN) applied in any direction at any point on the grab...
-
Door King Inc. 1150 Overhead Gate and Door opener
Low profile ideal for low clearance underground parking areas Shock mounts greatly reduce noise and vibration from being transferred into above offices or apartments Direct drive limit...
-
HOGGAN Wireless Dynamometer ergoFET Push/Pull Force Gauge
Dynamometer Designed Specifically for Ergonomic and Engineering Applications Measures Push & Pull Forces from Multiple Directions 300 lb Load Capacity and Measuring...
-
HEWI System Lignum Handrails
Just like the ENTRO handrails made of solid wood – the color, texture and grain differ depending on the wood species....
-
Mannington Mills All Star Collection Commercial Carpet
Like a well designed play, the All Star Collection combines graphic simplicity and subtle textural dimensions that create drama for any setting....
