These guidelines cover temporary buildings or facilities as well as permanent facilities....
Search Results "Residential Facility"
Commonly Searched Documents
-
4.1.1(4) Temporary Structures
-
Scoping Requirements [F244.5, F245.4, F246.4, and F247.3.2]
An ORAR is a continuous, unobstructed path that is intended for pedestrian use and that connects accessible elements, spaces, and facilities within camping and picnic facilities and at viewing...
-
Areas of sport activity. (Section-by-Section Analysis)
For purposes of the program accessibility requirement, as with play areas and swimming pools, where an existing facility provides multiple areas of sport activity that serve the same purpose...
-
F235 Recreational Boating Facilities
[See subsections ...]
-
235 Recreational Boating Facilities
[See subsections ...]
-
R101 Purpose (Section-by-Section Analysis)
R101 Purpose (Section-by-Section Analysis) The proposed guidelines contain scoping and technical requirements to ensure that facilities for pedestrian circulation and use located in the...
-
F202.1 General
Additions and alterations to existing buildings or facilities, including leased buildings or facilities, shall comply with F202....
-
206.7.10 Recreational Boating Facilities and Fishing Piers and Platforms
206.7.10 Recreational Boating Facilities and Fishing Piers and Platforms....
-
11B-249.1.1
Where adult changing facilities are provided, each adult changing facility shall comply with Section 11B-813....
- ADA25: #13 of 25 -- Jails and Prisons
-
809.2.2 Turning Space
809.2.2 Turning Space. All rooms served by an accessible route shall provide a turning space complying with 304. EXCEPTION: Turning space shall not be required in exterior spaces...
-
1130A.1 General
1130A.1 General. An accessible route shall be provided through all rooms and spaces of the dwelling unit. The accessible route shall pass through the primary entry door, and shall...
-
1133A.2, Item 3
3. A clear floor space at least 30 inches (762 mm) by 48 inches (1219 mm) that allows either a parallel or a forward approach shall be provided at the work surface required...
-
1132A.4.1 Thresholds
1132A.4.1 Thresholds. Thresholds at the primary entry and required exit doors shall be no higher than ½ inch (12.7 mm). Thresholds at secondary exterior doors, including sliding door...
-
1131A.2 Changes greater than ½ inch
1131A.2 Changes greater than ½ inch. Changes in level greater than ½ inch (12.7 mm) shall be made by means of a sloped surface not greater than 1 unit vertical in 20 units...
-
1131A.1 Changes in level not exceeding ½ inch
1131A.1 Changes in level not exceeding ½ inch. Abrupt changes in level along any accessible route shall not exceed ½ inch (12.7 mm). When changes in level do occur, they shall be...
-
1132A.5.2 Strike edge maneuvering space at doors
1132A.5.2 Strike edge maneuvering space at doors. The width of the level area on the side to which the door swings shall extend 18 inches (457 mm) past the strike edge for all doors....
-
Platform Lifts in Transient Lodging Guest Rooms and Dwelling Units
Platform Lifts in Transient Lodging Guest Rooms and Dwelling Units. The 1991 Standards, at section 4.1.3(5), exception 4, and the 2010 Standards, at sections 206.7 and 206.7.6, both...
-
11B-809.2.2 Turning space
All rooms served by an accessible route shall provide a turning space complying with Section 11B-304. Exception: Turning space shall not be required in exterior spaces 30 inches...
-
809.2.2 Turning Space
All rooms served by an accessible route shall provide a turning space complying with 304. EXCEPTION: Turning space shall not be required in exterior spaces 30 inches (760 mm)...
-
809.2.2 Turning Space
All rooms served by an accessible route shall provide a turning space complying with 304. EXCEPTION: Turning space shall not be required in exterior spaces 30 inches (760 mm)...
-
1132A.4, Item 1
1. Exterior landings of impervious construction (e.g., concrete, brick, flagstone) serving primary entry doors and required exit doors are limited to not more than ½ inch (12.7...
-
1133A.4, Item 2
2. A minimum linear length of 30 inches (762 mm) of countertop shall be provided for a work surface.
-
1133A.3 Removable base cabinets
1133A.3 Removable base cabinets. Sinks and work surfaces required by Section 1133A.4 (see Item 1 and Item 2) shall be provided with a knee and toe space complying with...
