Section 303.3 covers the current ADA Standards for beveled level changes.
Search Results "Maximum Extent Practicable"
Filters
Commonly Searched Documents
-
Beveled: ADA Standard Section 303.3
-
Location: ADA Standard Section 407.2.1.4
Section 407.2.1.4 covers the current ADA Standards for the location of elevator call controls.
-
Play Tables: ADA Standard Section 1008.4.3
The tops of rims, curbs, or other obstructions shall be 31 inches (785 mm) high maximum....
-
11B-403.5.3 Passing spaces
An accessible route with a clear width less than 60 inches (1524 mm) shall provide passing spaces at intervals of 200 feet (60,960 mm) maximum....
-
1607.9.2 Grab bars, shower seats and accessible benches
designed to resist a single concentrated load of 250 pounds (1.11 kN) applied in any direction at any point on the grab bar, shower seat, or seat of the accessible bench so as to produce the maximum...
-
‘‘direct threat’’
A ‘‘direct threat’’ is a significant risk to the health or safety of others that cannot be eliminated by a modification of policies, practices, or procedures, or by the provision of auxiliary...
-
T213 Seats
The priority seats must be located as near as practicable to a doorway used for boarding and alighting....
-
6. What happens if the public school district thinks that providing a particular auxiliary aid or service would result in a fundamental alteration in the nature of a service, program, or activity, or an undue financial and administrative burden?
in a fundamental alteration or undue burdens, the district must take other steps that would not result in such an alteration or such burdens but would nevertheless ensure that, to the maximum...
-
B. Patient Protection and Affordable Care Act and Section 510 of the Rehabilitation Act
The statute provides that the standards must allow for independent access to and use of the equipment by individuals with disabilities to the maximum extent possible....
-
11B-904.4.1 Parallel approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum above the finish floor shall be provided....
-
11B-604.2 Location
The centerline of the water closet shall be 17 inches (432 mm) minimum to 18 inches (457 mm) maximum from the side wall or partition, except that the water closet shall be 17 inches (432...
-
11B-904.4.1 Parallel approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum above the finish floor shall be provided....
-
11B-604.2 Location
The centerline of the water closet shall be 17 inches (432 mm) minimum to 18 inches (457 mm) maximum from the side wall or partition, except that the water closet shall be 17 inches (432...
-
I. TITLE I: AN OVERVIEW OF LEGAL REQUIREMENTS
Following chapters look at these and other requirements in more detail and illustrate how they apply to specific employment practices....
-
§35.105(d)
the self-evaluation requirement of a regulation implementing section 504 of the Rehabilitation Act of 1973, then the requirements of this section shall apply only to those policies and practices...
-
§ 36.302(c)(9)(i)
(i) A public accommodation shall make reasonable modifications in policies, practices, or procedures to permit the use of a miniature horse by an individual with a disability if the miniature...
-
§100.500(c)(1)
party, with respect to a claim brought under 42 U.S.C. 3612, or the plaintiff, with respect to a claim brought under 42 U.S.C. 3613 or 3614, has the burden of proving that a challenged practice...
-
§ 35.105(d)
the self-evaluation requirement of a regulation implementing section 504 of the Rehabilitation Act of 1973, then the requirements of this section shall apply only to those policies and practices...
-
11B-703.5.4 Character proportions
Characters shall be selected from fonts where the width of the uppercase letter “O” is 60 percent minimum and 110 percent maximum of the height of the uppercase letter “I”....
-
M305.2.1 Location
Transfer supports shall comply with M305.2.1.1 or M305.2.1.2 and shall be located 1 ½ inches (38 mm) maximum measured horizontally from the plane defined by the nearest edge of the transfer...
-
404.2.5 Thresholds
Thresholds, if provided at doorways, shall be 1/2 inch (13 mm) high maximum. Raised thresholds and changes in level at doorways shall comply with 302 and 303....
-
404.2.5 Thresholds
Thresholds, if provided at doorways, shall be 1/2 inch (13 mm) high maximum. Raised thresholds and changes in level at doorways shall comply with 302 and 303....
-
407.8.2 Side Reach
The vertical reference plane shall be centered on the operable part and placed at the leading edge of the maximum protrusion of the ICT within the length of the vertical reference plane....
-
407.8.3.2.1 Operable Part Height for ICT with Obstructed Forward Reach
407.8.3.2.1 Operable Part Height for ICT with Obstructed Forward Reach Reach Depth Operable Part Height Less than 20 inches (510 mm) 48 inches (1220 mm) maximum...