Building entries must be flush with the grade of the outside access route and have a beveled doorsill that is not more than one-half inch high....
Search Results "High-Low Drinking Fountain"
-
Getting In
-
K. Operable Parts
wands and controls on fixed lamps and HVAC units easily operable with one hand, without tight grasping, pinching or twisting of the wrist, since many persons with disabilities may not have high...
-
E2-3. Interior Stairs
., protected with a cane-detectable warning or a barrier that prevents travel into the area with less than an 80-inch-high head clearance)? [ADA Stds 4.4.2] Yes _____ No _____...
-
Can surface decals substitute for post- or wall-mounted signs?
No, the Standards require signs identifying accessible parking spaces that are at least 60” high measured to the bottom edge of the sign so that they are visible when a vehicle is parked...
-
What Kind Of Documentation Is Sufficient To Support A Request For Testing Accommodations?
Past Testing Accommodations on Similar Standardized Exams or High-Stakes Tests. ...
-
226.1 General
Where dining surfaces are provided for the consumption of food or drink, at least 5 percent of the seating spaces and standing spaces at the dining surfaces shall comply with 902....
-
11B-1008.2 Accessible routes
Where accessible routes serve ground level play components, the vertical clearance shall be 80 inches (2032 mm) high minimum....
-
T402.7 Edge Guards
Edge guards shall be 2 inches (51 mm) high minimum above the ramp or bridgeplate surface....
-
2.2 Who to Talk to About Getting Changes Made
If you are asking for bigger changes, it is best to talk to the people who make high-level decisions, such as the manager or owner. Ask the staff the best way to contact that person. ...
-
4.10.5 RAISED CHARACTERS ON HOISTWAY ENTRANCES
Such characters shall be 2 in (50 mm) high and shall comply with 4.30. Permanently applied plates are acceptable if they are permanently fixed to the jambs. (See Fig. 20)....
-
4.30.4* RAISED CHARACTERS OR SYMBOLS
Raised characters or symbols shall be at least 5/8 in (16 mm) high, but no higher than 2 in (50 mm). Symbols or pictographs on signs shall be raised 1/32 in (0.8 mm) minimum....
-
11B-1008.2 Accessible routes
Where accessible routes serve ground level play components, the vertical clearance shall be 80 inches (2032 mm) high minimum....
-
§ 38.159(c)(2) Ramp surface
The ramp surface shall be continuous and slip resistant; shall not have protrusions from the surface greater than 1/4 inch (6.5 mm) high; shall have a clear width of 30 inches (760 mm);...
-
11B-1008.2 Accessible routes
Where accessible routes serve ground level play components, the vertical clearance shall be 80 inches (2032 mm) high minimum....
-
A. Purpose and Objective of the Final Rule Relative to Movie Theaters Categorized as Small
Thus, patrons who are deaf or hard of hearing, or blind or have low vision, are often shut out from the movie-going experience and cannot fully take part in movie-going outings with family...
-
Issue: Effective Communication
In addition, city governments often fail to provide materials in alternate formats (Braille, large print, or audio cassettes) to individuals who are blind or have low vision....
-
Significant alternatives which minimize any significant economic impacts on small entities
transitions are provided at pedestrian street crossings, detectable warning surfaces indicate the boundary between a pedestrian route and a vehicular route for pedestrians who are blind or have low...
-
Shared Streets
Vehicles typically travel at low speeds on shared streets. Trees, planters, parking areas, and other obstacles may be placed on shared streets to slow vehicles....
-
904.4.2 Forward Approach
A portion of the counter surface that is 30 inches (760 mm) long minimum and 36 inches (915 mm) high maximum shall be provided....
-
2. c. REACH RANGES
Figure 18 (high forward reach range), and Figure 19 (side reach range) illustrate reach ranges accessible to wheelchair users or people with limited mobility....
-
A4.16.3 Height
Toilet seats 18 in (455 mm) high seem to be a reasonable compromise. Thick seats and filler rings are available to adapt standard fixtures to these requirements....
-
A4.16.3 HEIGHT
Toilet seats 18 in (455 mm) high seem to be a reasonable compromise. Thick seats and filler rings are available to adapt standard fixtures to these requirements....
-
16. Please indicate the composition of the trail by selecting the material(s) installed
Please indicate the composition of the trail by selecting the material(s) installed: Natural/Native soil with stabilizer Natural/Native soil without stabilizer Soil with high organic...
-
11B-812.9 Surface marking
EVCS vehicle spaces shall provide surface marking stating “EV CHARGING ONLY” in letters 12 inches (305 mm) high minimum....