Emergency control buttons shall have their centerlines 35 inches (890 mm) minimum above the finish floor.
Search Results "Character Height (Raised)"
-
407.4.6.4.1 Height
-
309.3 Height
Operable parts shall be placed within one or more of the reach ranges specified in 308.
-
407.3.3.1 Height
The device shall be activated by sensing an obstruction passing through the opening at 5 inches (125 mm) nominal and 29 inches (735 mm) nominal above the finish floor.
-
309.3 Height
Operable parts shall be placed within one or more of the reach ranges specified in 308.
-
811.3 Height
Storage elements shall comply with at least one of the reach ranges specified in 308.
-
407.2.1.1 Height
Call buttons and keypads shall be located within one of the reach ranges specified in 308, measured to the centerline of the highest operable part. EXCEPTION: Existing call...
-
T304.2 Height
Operable parts shall be located 24 inches (610 mm) minimum and 48 inches (1220 mm) maximum above the floor of non-rail vehicles.
-
309.3 Height
Operable parts shall be placed within one or more of the reach ranges specified in 308.
-
4.27.3* Height
The highest operable part of controls, dispensers, receptacles, and other operable equipment shall be placed within at least one of the reach ranges specified in 4.2.5 and 4.2.6....
-
309.3 Height
Operable parts shall be placed within one or more of the reach ranges specified in 308.
-
4.27.3* HEIGHT
The highest operable part of all controls, dispensers, receptacles, and other operable equipment shall be placed within at least one of the reach ranges specified in 4.2.5 and 4.2.6....
-
4.25.3 HEIGHT
Accessible storage spaces shall be within at least one of the reach ranges specified in 4.2.5 and 4.2.6. Clothes rods shall be a maximum of 54 in (1370 mm) from the floor (see Fig....
-
TACTILE SIGN
A sign containing raised characters and/or symbols and accompanying Braille....
-
TACTILE SIGN
A sign containing raised characters and/or symbols and accompanying Braille....
- Designing Sidewalks and Trails for Access, Part I of II: Review of Existing Guidelines and Practices
-
11B-703.6.1 Pictogram field
Pictograms shall have a field height of 6 inches (152 mm) minimum. Characters and Braille shall not be located in the pictogram field. Advisory 11B-703.6.1 Pictogram field....
-
11B-703.6.1 Pictogram field
Pictograms shall have a field height of 6 inches (152 mm) minimum. Characters and Braille shall not be located in the pictogram field. Advisory 11B-703.6.1 Pictogram field....
-
11B-703.5.7 Stroke thickness
Stroke thickness of the uppercase letter “I” shall be 10 percent minimum and 20 percent maximum of the height of the character. [2010 ADAS] 703.5.7 Stroke Thickness....
-
TACTILE SIGN
A sign containing raised characters and/or symbols and accompanying Braille....
- Zurn Z5560 Commercial EcoVantage Elongated Toilet ADA Height
-
T702.7 Line Spacing
Spacing between the baselines of separate lines of characters within a message shall be 135 percent minimum and 170 percent maximum of the character height....
-
California Department of Managed Health Care - Physical Access to Health Care Fact Sheet
If You Use a Wheelchair or Have a Hard Time Walking
-
II. Recommendations of Diagnostic Imaging Equipment Manufacturers on Transfer Surface Low Height
As a standard , we believe the increased access goal is well met by having a 19 inch minimum height and transfer height adjustability....
-
Two Step Transfers Attainable Heights
Maximum attainable height difference in two step transfer percentiles (in inches) Percentiles Protocol 5th...