The MDE NPRM proposed to explain that the enforcing authority would specify the minimum number of types of accessible diagnostic equipment that would be required to comply with the MDE Standards...
Search Results "Minimum Dimension"
Filters
Commonly Searched Documents
-
M201.1 Enforcing Authority (Section-by-Section Analysis)
-
7(2)(b)(iv)
In locations where toilets are adjacent to walls or bathtubs, the center line of the fixture is a minimum of 1'6" from the obstacle....
-
11B-504.2 Treads and risers
Risers shall be 4 inches (102 mm) high minimum and 7 inches (178 mm) high maximum. Treads shall be 11 inches (279 mm) deep minimum....
-
1011.5 Fire Rings, Grills, Fireplaces, and Wood Stoves
This section requires fire building surfaces to be 9 inches minimum above the ground, and cooking surfaces to be 15 inches minimum and 34 inches maximum above the ground....
-
1011.4.2 Wheelchair Space
Wheelchair spaces shall be 30 inches (760 mm) minimum by 48 inches (1220 mm) minimum....
-
11B-504.2 Treads and risers
Risers shall be 4 inches (102 mm) high minimum and 7 inches (178 mm) high maximum. Treads shall be 11 inches (279 mm) deep minimum. ...
-
11B-703.2.5 Character height
Character height measured vertically from the baseline of the character shall be 5/8 inch (15.9 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter “I”....
-
11B-504.2 Treads and risers
Risers shall be 4 inches (102 mm) high minimum and 7 inches (178 mm) high maximum. Treads shall be 11 inches (279 mm) deep minimum. ...
-
11B-703.2.4 Character proportions
Characters shall be selected from fonts where the width of the uppercase letter “O” is 60 percent minimum and 110 percent maximum of the height of the uppercase letter “I”....
-
11B-703.5.4 Character proportions
Characters shall be selected from fonts where the width of the uppercase letter “O” is 60 percent minimum and 110 percent maximum of the height of the uppercase letter “I”....
-
Caroma® USA Liano Under Counter Sink
Generous bowl size Vitreous china Rear overflow outlet Bowl capacity: 2.9 gallons (9.0 liters) c-UPC - IAPMO listed for USA and Canada Dimensions...
-
Inclusion Solutions Pakflatt® Franklin® Voting Booth
Dimensions Packed Dimensions: 38.5″ l x 9.5″ w x 25″ h Weight (assembled): 44 lbs....
-
(3) Adjustability: Transfer Surface Intermediate Heights
low transfer height and a minimum high transfer height....
-
3.3.3. Captioning Device Scoping Requirements
The Joint Comment suggested that movie theaters maintain a minimum number of captioning devices based on the number of auditoriums displaying digital movies within a movie theater, or by...
-
CCDA (California Commission on Disability Access) Accessibility Construction Inspection Checklist
It is important during the progress inspections that the trained building code official/building inspector verify all elements will be able to meet the minimum accessibility requirements...
-
Long Island Center for Independent Living, Inc. (LICIL) - Levittown, NY
One of 41 Independent Living Centers operating in New York State, LICIL is governed by a board of directors, which includes a minimum of 51 percent of persons with disabilities....
-
Assisted Living Directory - Louisiana Assisted Living Facilities & Senior Care
Some of the minimum services that need to be provided by an assisted living facility in Louisiana include, but are not limited to: one meal per day, housekeeping services and personal care...
-
Assisted Living Directory - Texas Assisted Living Facilities & Senior Care Search
Type C facilities are 4-bed facilities that “meet the minimum standards and rules for enrollment in the DADS Adult Foster Care home program.”...
-
11B-1007.2 Accessible routes
Where accessible routes intersect playing surfaces of holes, a 1 inch (25 mm) maximum curb shall be permitted for a width of 32 inches (813 mm) minimum. 3. ...
-
11B-1007.2 Accessible routes
Where accessible routes intersect playing surfaces of holes, a 1 inch (25 mm) maximum curb shall be permitted for a width of 32 inches (813 mm) minimum. 3....
-
11B-502.5 Vertical clearance
Parking spaces, access aisles and vehicular routes serving them shall provide a vertical clearance of 98 inches (2489 mm) minimum. [2010 ADA Standards] 502.5 Vertical Clearance....
-
11B-904.4.1 Parallel approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum above the finish floor shall be provided....
-
11B-406.5.10 Diagonal curb ramps
Diagonal curb ramps with flared sides shall have a segment of curb 24 inches (610 mm) long minimum located on each side of the curb ramp and within the marked crossing....
-
M303.2.4 Equipment Clearances (Section-by-Section Analysis)
The MDE NPRM preamble sought input with question 34 on whether the dimensions recommended by the Wheeled Mobility Anthropometry Project should be adopted.10 Three commenters responded....
