Transfer supports shall be located within reach of the transfer surface and shall not obstruct transfer onto or off of the surface when in position.
Search Results "Amusement Ride Seat"
-
M305.2.1 Location
-
Section 36.308 Seating in Assembly Areas (Section-by-Section Analysis)
Section 36.308(a)(1)(ii)(A) and (B) have been revised to provide that wheelchair and companion seats must be an integral part of the seating area, dispersed to all accessible seating levels...
-
§ 36.302(f)(6) Hold and release of accessible seating
(6) Hold and release of accessible seating. ...
-
Sell-outs in specific seating areas. (Section-by-Section Analysis)
Under the second contingency, proposed § 36.302(f)(6)(ii), a facility could release unsold accessible seating in a specific seating area if all of the standard seats in that location were...
-
Sell-outs in specific seating areas. (Section-by-Section Analysis)
Under the second option, § 35.138(f)(2), a facility could release unsold accessible seating in a specific seating area once all of the standard seats in that location were sold out. ...
-
Hold and release of unsold accessible seating. (Section-by-Section Analysis)
Hold and release of unsold accessible seating....
-
Hold-and-release of unsold accessible seating. (Section-by-Section Analysis)
of unsold accessible seating....
-
Release of unsold accessible seats. (Section-by-Section Analysis)
Proposed § 36.302(f)(6) provides regulatory guidance regarding the release of unsold accessible seats. ...
-
II. ENFORCING THE ADA PART 2
National Amusements that provides similar relief at the National Amusements chain.96 Each of these agreements or court orders requires the respective movie theater company to construct ramps...
-
Dispersion of Wheelchair Seating Areas (Preamble, Section-by-Section Analysis)
- Dispersal of wheelchair seating areas in theaters will be required only where there are more than 300 seats, rather than in all cases....
- BYO Recreation Inc. Accent Swing Seat
-
M305.2.2 Length (Section-by-Section Analysis)
In the MDE NPRM there was no requirement for length of the transfer support; however, the MDE NPRM preamble noted that the Access Board was considering requiring the transfer...
-
5.7 Lift Compatibility
5.7 Lift Compatibility.
-
5.7 Lift Compatibility Recommendations
5.7 Lift Compatibility Recommendations
-
T215.1 General
Communication features on non-rail vehicles shall comply with T215.
-
T215 Communication Features
[See subsections ...]
-
Release of unsold accessible seats. (Section-by-Section Analysis)
Section 35.138(f) provides regulatory guidance regarding the release of unsold accessible seats. ...
-
T303.3.1 Seat-Back Handhold Cross Section
The cross section of seat-back handholds shall have an outside diameter of 7/8 inches (22 mm) minimum and 2 inches (50 mm) maximum....
-
Handrails, Grab Bars, and Tub and Shower Seats [4.26]
Handrails, Grab Bars, and Tub and Shower Seats [4.26] ADAAG 4.26 provides technical requirements for: handrails at ramps [4.8] and stairs [4.9] grab bars at water closets...
-
Conclusions
Results showed that transferring to a height similar to the average wheelchair seat to floor height of the sample (21”, 53.3 cm) is achievable by 95% of adult wheelchair users who independently...
- Kompan, Inc. M143 - Albatross Seesaw
- UpScale by Medical Accessibility - Adjustable Height Exam Table with Built-in Scale
-
Wheelchair seating locations must be on an accessible route
• Wheelchair seating locations must be on an accessible route that provides access from parking and transportation areas and that connects to all public areas, including concessions, restaurants...
-
Prevention of fraud in purchase of accessible seating. (Section-by-Section Analysis)
Prevention of fraud in purchase of accessible seating....