(7) Building Signage. Signs which designate permanent rooms and spaces shall comply with 4.30.1, 4.30.4, 4.30.5 and 4.30.6....
Search Results "TTY Signage"
Filters
Commonly Searched Documents
-
4.1.2(7) Building Signage
-
Egress Signage
Various signage requirements specific to certain spaces and elements have been relocated for simplicity and ease of reference to section 216....
-
11B-217.4 TTYs
TTYs complying with Section 11B-704.4 shall be provided in accordance with Section 11B-217.4. [2010 ADAS] Advisory 217.4 TTYs. ...
-
11B-217.4 TTYs
TTYs complying with Section 11B-704.4 shall be provided in accordance with Section 11B-217.4. Advisory 11B-217.4 TTYs....
-
Recognizing a TTY Call
Recognizing a TTY Call Where TTYs share a voice line, it is important that persons answering the phone know how to recognize a TTY call....
-
D. Signage
Signage (1) Defendants will install directional signage to indicate accessible entrances, and the routes from inaccessible entrances to designated accessible entrances....
-
INFORMATION AND SIGNAGE {35.163}
INFORMATION AND SIGNAGE {35.163} “A public entity shall ensure that interested persons, including persons with impaired vision or hearing, can obtain information as to the existence and...
-
4. Switching Between Voice Mode and TTY Mode
All call takers must have the capability to switch back and forth easily from TTY mode to voice mode during the same call....
-
Number of TTYs
In order to afford equal access to TTY users, every call-taking position within a PSAP must have its own TTY or TTY-compatible equipment....
-
§35.163 Information and signage
§35.163 Information and signage....
-
Height Above Finish Floor or Ground: ADA Standard Section 703.4.1
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60...
-
Signs: ADA Standard Section 703
[See subsections ...]
-
Signs: ADA Standard Section 216
Section 216 covers scoping requirements in the current ADA Standards for signs.
-
11B-703 Signs
[See subsections ...]
-
11B-216 Signs
[See subsections ...]
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60...
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
Geometric symbols at entrances to toilet and bathing rooms shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface...
-
11B-703.7.2.6.4 Edges and vertices on geometric symbols
Edges shall be eased or rounded at 1/16 inch (1.59 mm) minimum, or chamfered at 1/8 inch (3.2 mm) maximum. Vertices shall be radiused between 1/8 inch (3.2 mm) minimum and ¼ inch...
-
11B-502.6.2 Minimum fine
Additional language or an additional sign below the International Symbol of Accessibility shall state “Minimum Fine $250.”
-
11B-502.6.4 Marking
Each accessible car and van space shall have surface identification complying with either Section 11B-502.6.4.1 or 11B-502.6.4.2.
-
Temporary Signage
Temporary Signage Temporary signs, which are exempt, include identification of tenancies, names and titles of room occupants, non-fixed signage and temporary postings ("Out of Service...
-
11B-703.1.1.2 Inspection
Signs and identification devices shall be field inspected after installation and approved by the enforcing agency prior to the issuance of a final certificate of occupancy per...
-
Height from Finish Floor or Ground: ADA Standard Section 703.5.6
Visual characters shall be 40 inches (1015 mm) minimum above the finish floor or ground. EXCEPTION: Visual characters indicating elevator car controls shall not be required to...
-
2. Amended TTY Requirements
In summary, this direct final rule incorporates the original TTY-related requirements into the revised 508 Standards and 255 Guidelines as follows....