Surfaces of curb ramps shall comply with 4.5....
Search Results "Stable Surface"
Filters
Commonly Searched Documents
-
4.7.4 SURFACE
-
11B-1008.2.6.1 Accessibility
Ground surfaces shall comply with ASTM F 1951. Ground surfaces shall be inspected and maintained regularly and frequently to ensure continued compliance with ASTM F 1951....
-
403.2 Floor or Ground Surface
403.2 Floor or Ground Surface. Floor or ground surfaces shall comply with 302....
-
11B-504.4 Tread surface
Stair treads shall comply with Section 11B-302. Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exception: Reserved.
-
11B-904.3.3 Check writing surfaces
Where provided, check writing surfaces shall comply with Section 11B-902.3....
-
Selection of Trail Surface Materials
Selection of Trail Surface Materials A review of trail surfacing products conducted for this project identified approximately 80 different trail surface materials that promoted providing...
-
11B-226.3 Dining surfaces exceeding 34 inches in height
Where food or drink is served for consumption at a counter exceeding 34 inches (864 mm) in height, a portion of the main counter 60 inches (1525 mm) minimum in length shall be...
-
804.3.3 Exposed Surfaces
804.3.3 Exposed Surfaces. There shall be no sharp or abrasive surfaces under the work surface counters....
-
Envirobond Helps Avoid Surface Staining
Envirobond's organic binder swells immediately when in contact with water. This means the erosion control properties of our products are active much faster than any other chemical...
-
Stabilized Engineered Wood Fiber for Accessible Trails
Laufenberg Abstract Trails made with wood chips are difficult for those who use mobility aids because the surface is soft, uneven, and shifting....
-
Accessible Work Surfaces
Concern was expressed that the reference to "work surfaces" may be confused as covering surfaces that are part of a work area or station. Response....
-
302 Floor or Ground Surfaces
302 Floor or Ground Surfaces...
-
804.3.3 Exposed Surfaces
There shall be no sharp or abrasive surfaces under the work surface counters....
-
804.3.3 Exposed Surfaces
There shall be no sharp or abrasive surfaces under the work surface counters....
-
403.2 Floor or Ground Surface
Floor or ground surfaces shall comply with 302....
-
403.2 Floor or Ground Surface
Floor or ground surfaces shall comply with 302....
-
1011.2.2 Surface
This section requires the surface of the clear ground space to be firm and stable....
-
Slope: ADA Standard Section 1002.4.2
The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position....
-
11B-1002.4.2 Slope
The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position....
-
Height: ADA Standard Section 505.4
Section 505.4 covers the current ADA Standards for the height of the top of the gripping surface of handrails.
-
11B-403.2 Floor or ground surface
Floor or ground surfaces shall comply with Section 11B-302....
-
11B-403.2 Floor or ground surface
Floor or ground surfaces shall comply with Section 11B-302....
-
11B-403.2 Floor or ground surface
Floor or ground surfaces shall comply with Section 11B-302....
