Bottom-hinged appliance doors, when in the open position, shall not be required to comply with 309.3....
Search Results "Spring Hinge"
Filters
Commonly Searched Documents
-
804.6.2 Operable Parts
-
404.2.4.2 Doorways without Doors or Gates, Sliding Doors, and Folding Doors
stop/latch side unless noted) From Front 48 inches (1220 mm) 0 inches (0 mm) From side1 42 inches (1065 mm) 0 inches (0 mm) From pocket/hinge...
-
11B-404.2.4.2 Doorways without doors or gates, sliding doors, and folding doors
48 inches (1219 mm) 0 inches (0 mm) From side1 42 inches (1067 mm) 0 inches (0 mm) From pocket/hinge...
-
11B-404.2.4.2 Doorways without doors or gates, sliding doors, and folding doors
From Front 48 inches (1219 mm) 0 inches (0 mm) From side1 42 inches (1067 mm) 0 inches (0 mm) From pocket/hinge...
-
404.2.6 Doors in Series and Gates in Series
The distance between two hinged or pivoted doors in series and gates in series shall be 48 inches (1220 mm) minimum plus the width of doors or gates swinging into the space....
-
804.6.2 Operable Parts
Bottom-hinged appliance doors, when in the open position, shall not be required to comply with 309.3....
-
Measuring Opening Force
., tensionometer), a device as simple as a spring-loaded plunger or "fish" scale is effective in measuring the force required to open a door....
-
4.13.7 Two Doors in Series
The minimum space between two hinged or pivoted doors in series shall be 48 in (1220 mm) plus the width of any door swinging into the space....
-
4.13.7 TWO DOORS IN SERIES
The minimum space between two hinged or pivoted doors in series shall be 48 in (1220 mm) plus the width of any door swinging into the space....
-
11B-804.6.2 Operable parts
Bottom-hinged appliance doors, when in the open position, shall not be required to comply with Section 11B-309.3....
-
11B-804.6.2 Operable parts
Bottom-hinged appliance doors, when in the open position, shall not be required to comply with Section 11B-309.3....
-
11B-804.6.2 Operable parts
Bottom-hinged appliance doors, when in the open position, shall not be required to comply with Section 11B-309.3....
-
D6
If an entry has a vestibule, is there a 30-inch by 48-inch clear floor space inside the vestibule where a wheelchair or scooter user can be outside the swing of a hinged door?...
-
AJW Architectural Products U685 Series Dual Toilet Tissue Dispenser & Sanitary Napkin Disposal - Partition Mounted
(Exposed mounting points) Toilet Tissue Dispenser: #22 gauge stainless steel hat adapters secure chrome plated, spring loaded rollers in place....
-
404.2.4.2 Doorways without Doors or Gates
stop/latch side unless noted) From Front 48 inches (1220 mm) 0 inches (0 mm) From side1 42 inches (1065 mm) 0 inches (0 mm) From pocket/hinge...
-
Restrooms Main Lobby
The force required to push or pull open the interior hinged doors to the restroom vestibule door is 10 lbf, which exceeds the maximum allowable door opening force of 5 lbf....
-
404.2.4.2 Doorways without Doors or Gates
48 inches (1220 mm) 0 inches (0 mm) From side 1 42 inches (1065 mm) 0 inches (0mm) From pocket/hinge...
-
Bed Height Fact Sheet
All beds (including the railings, box spring, and mattress) within a mobility accessible (ADA) room should be no higher than 23” and no lower than 17” above the floor surface....
-
4.5.5 Controls and Operating Mechanisms
Trash and recycling containers with hinged lids and controls designed to keep out large animals shall not be required to comply with the operable parts requirements in ABAAS section 309.4...
-
Play Components
Swings, spring riders (below), water tables, playhouses, slides, and climbers (right) are among the many different play components....
-
11B-404.2.4.2 Doorways without doors or gates, sliding doors, and folding doors
48 inches (1219 mm) 0 inches (0 mm) From side1 42 inches (1067 mm) 0 inches (0 mm) From pocket/hinge...
-
404.2.9 Door and Gate Opening Force
Interior hinged doors and gates: 5 pounds (22.2 N) maximum. 2. Sliding or folding doors: 5 pounds (22.2 N) maximum. 3....
-
Can maneuvering for a forward approach be provided when there is space at least 60” deep in front of a door?
front of a door that is unobstructed on approach sides will provide sufficient depth for a forward approach if appropriate strike-side clearance is provided; but in the case of pull-side/ hinge-side...
-
11B-404.2.4.1 Swinging doors and gates
1524 mm) 18 inches (457 mm)5 From front Push 48 inches (1219 mm) 0 inches (0 mm)1 From hinge...
