The requirements of Chapter 4 shall apply to ICT that is hardware where required by 508 Chapter 2 (Scoping Requirements), 255 Chapter 2 (Scoping Requirements), and where otherwise referenced...
Search Results "Panic Hardware"
-
401.1 Scope
-
11B-404.2.7 Door and gate hardware
Operable parts of such hardware shall be 34 inches (864 mm) minimum and 44 inches (1118 mm) maximum above the finish floor or ground....
-
11B-404.2.7 Door and gate hardware
Operable parts of such hardware shall be 34 inches (864 mm) minimum and 44 inches (1118 mm) maximum above the finish floor or ground....
-
11B-404.2.7 Door and gate hardware
Where sliding doors are in the fully open position, operating hardware shall be exposed and usable from both sides....
-
Problem Four (Entrance)
Solution: There are four typical solutions: add an accessible pull or handle and leave the door unlatched; install fully accessible door hardware; leave the door propped open; or provide...
-
Toilet Rooms North (Celebrity Spies)–Men [sic]
The men's toilet room stall door hardware requires tight grasping and twisting of the wrist. See Standards § 4.13.9....
-
Doors and Gates Operated Only By Security Personnel [§404.1, Ex]
[§404.1, Ex] Manual doors, doorways, and gates that are designed to be operated only by security personnel, such as guards in a jail or prison, are exempt from requirements for hardware...
-
Toilet Rooms South (Briefing Theater)
The men's and women's toilet room stall door hardware requires tight grasping and twisting of the wrist. See Standards § 4.13.9. ll....
-
4.17.5* Doors
Toilet stall doors, including door hardware, shall comply with 4.13....
-
Gates and Barriers
Gate hardware must comply with ABAAS, section 404.2.7....
-
Doors: ADA Standard Section 604.8.1.2
Section 604.8.1.2 covers the current ADA Standards for wheelchair accessible compartment doors.
-
11B-404.3 Automatic and power-assisted doors and gates
Automatic doors and automatic gates shall comply with Section 11B-404.3. Full-powered automatic doors shall comply with ANSI/BHMA A156.10. Low-energy and power-assisted doors shall...
-
11B-404.3 Automatic and power-assisted doors and gates
Automatic doors and automatic gates shall comply with Section 11B-404.3. Full-powered automatic doors shall comply with ANSI/BHMA A156.10. Low-energy and power-assisted doors shall...
-
Are locks operated by keys prohibited due to the pinching or twisting of the wrist their operation typically requires?
No, non-fixed portions of door or gate hardware, including keys and access cards, are not covered by the Standards, but those that can be used without pinching or turning will provide easier...
-
SecurityMAX™ Package and SmartTouch® Bolt by Milgard
The SecurityMAX™ package includes the multi-point locking system paired with the new, innovative SmartTouch® Bolt. The SmartTouch Bolt is a fully integrated, easy-to-use bolt...
-
[2010 ADAS] 105.2.1 ANSI/BHMA
BHMA Builders Hardware Manufacturers’ Association 355 Lexington Avenue, 17th Floor New York, NY 10017-6603 Standard Reference Number Title Referenced...
-
Entry Doors
In addition, the door hardware must not require tight twisting, pinching, or grasping in order to use it....
-
Sec.36.403(c)(2)
(2) For the purposes of this section, alterations to windows, hardware, controls, electrical outlets, and signage shall not be deemed to be alterations that affect the usability of or access...
-
F105.2.1 ANSI/BHMA
Copies of the referenced standards may be obtained from the Builders Hardware Manufacturers Association, 355 Lexington Avenue, 17th floor, New York, NY 10017 (http://www.buildershardware.com...
-
105.2.1 ANSI/BHMA
Copies of the referenced standards may be obtained from the Builders Hardware Manufacturers Association, 355 Lexington Avenue, 17th floor, New York, NY 10017 (http://www.buildershardware.com...
-
105.2.1 ANSI/BHMA
Copies of the referenced standards may be obtained from the Builders Hardware Manufacturers Association, 355 Lexington Avenue, 17th floor, New York, NY 10017 (http://www.buildershardware.com...
-
[2010 ADAS] 105.2.1 ANSI/BHMA
Copies of the referenced standards may be obtained from the Builders Hardware Manufacturers Association, 355 Lexington Avenue, 17th floor, New York, NY 10017 (http://www.buildershardware.com...
-
PC Doors Pocket Door E-Z Closer
PC Doors Pocket Door E-Z Closer
-
Sargent 11 Line Lever Lock
Requires the Registered User plan or above. Login!
