A second exception notes that compliance is required unless it is technically infeasible, in which case compliance is required to the maximum extent feasible (202.3, Exception 2)....
Search Results "Maximum Extent Practicable"
-
Altered Elements on an Accessible Route
-
F202.3 Alterations
In alterations, where compliance with applicable requirements is technically infeasible, the alteration shall comply with the requirements to the maximum extent feasible. 3....
-
11B-202.5 Alterations to qualified historic buildings and facilities
(3)(i) Alterations to historic properties shall comply, to the maximum extent feasible, with the provisions applicable to historic properties in the design standards specified in §35.151...
-
11B-202.5 Alterations to qualified historic buildings and facilities
(3)(i) Alterations to historic properties shall comply, to the maximum extent feasible, with the provisions applicable to historic properties in the design standards specified in §35.151...
-
11B-202.5 Alterations to qualified historic buildings and facilities
(3)(i) Alterations to historic properties shall comply, to the maximum extent feasible, with the provisions applicable to historic properties in the design standards specified in §35.151...
-
202.3 Alterations
In alterations, where compliance with applicable requirements is technically infeasible, the alteration shall comply with the requirements to the maximum extent feasible. 3....
-
§ 36.302 Modifications in policies, practices, or procedures
§ 36.302 Modifications in policies, practices, or procedures. * * * * *...
-
4.1.6(3)(f)(ii)
(ii) Where it is technically infeasible to alter all performing areas to be on an accessible route, at least one of each type of performing area shall be made accessible.
-
Site Constraints
Platform lifts are permitted where "existing or other constraints" make ramp or elevator access "infeasible." This is intended to cover altered facilities where limited space or...
-
4.1.6(3)(e)(ii)
(ii) Where it is technically infeasible to install a required standard stall (Fig. 30(a)), or where other codes prohibit reduction of the fixture count (i.e., removal of a water...
-
§ 35.151(b)(4) Path of travel
An alteration that affects or could affect the usability of or access to an area of a facility that contains a primary function shall be made so as to ensure that, to the maximum extent...
-
§ 35.151(b)(4) Path of travel
An alteration that affects or could affect the usability of or access to an area of a facility that contains a primary function shall be made so as to ensure that, to the maximum extent...
-
11B-202.3 Alterations
Any elements or spaces of the building or facility that are required to comply with these requirements must be made accessible within the scope of the alteration, to the maximum extent feasible...
-
11B-202.3 Alterations
Any elements or spaces of the building or facility that are required to comply with these requirements must be made accessible within the scope of the alteration, to the maximum extent feasible...
-
Construction and Manufacturing Tolerances: ADA Standard Section 104.1.1
Section 104.1.1 of the ADA Standards covers the most current information on dimensions in regards to construction and manufacturing tolerances in the ADA Standards.
-
11B-104.1.1 Construction and manufacturing tolerances
Where an element is to be installed at the minimum or maximum permitted dimension, such as "15 inches minimum" or "5 pounds maximum", it would not be good practice to specify "5 pounds (...
-
11B-104.1.1 Construction and manufacturing tolerances
Where an element is to be installed at the minimum or maximum permitted dimension, such as "15 inches minimum" or "5 pounds maximum", it would not be good practice to specify "5 pounds (...
-
1002.4.3 Gaps
are at rest in the load and unload position, the vertical difference between the floors shall be within plus or minus 5/8 inches (16 mm) and the horizontal gap shall be 3 inches (75 mm) maximum...
-
X. Alterations
Alterations after January 26, 1992, to existing places of public accommodation and commercial facilities must be accessible to the maximum extent feasible. ...
-
11B-1002.4.3 Gaps
at rest in the load and unload position, the vertical difference between the floors shall be within plus or minus 5/8 inches (15.9 mm) and the horizontal gap shall be 3 inches (76 mm) maximum...
-
1002.4.3 Gaps
are at rest in the load and unload position, the vertical difference between the floors shall be within plus or minus 5/8 inches (16 mm) and the horizontal gap shall be 3 inches (75 mm) maximum...
-
1002.4.3 Gaps
are at rest in the load and unload position, the vertical difference between the floors shall be within plus or minus 5/8 inches (16 mm) and the horizontal gap shall be 3 inches (75 mm) maximum...
-
§382.3 Expected maximum flight duration
Expected maximum flight duration means the carrier's best estimate of the total duration of the flight from departure gate to arrival gate, including taxi time to and from the terminals,...
-
F233.3.3 Alterations
Alterations shall comply with F233.3.3. EXCEPTION: Where compliance with 809.2, 809.3, or 809.4 is technically infeasible, or where it is technically infeasible to provide an...