[See subsections ...]
Search Results "Grab Bar Clearance"
Filters
Commonly Searched Documents
-
11B-609 Grab bars
-
Grab Bar Height
Commenters pointed out the proposed rule was not clear on whether the height of grab bars was to be measured to the top or to the centerline. Response....
-
11B-604.7 Dispensers and disposal units
The outlet of the dispenser shall be 15 inches (380 mm) minimum and 48 inches (1220 mm) maximum above the finish floor and shall not be located behind grab bars....
-
Rear Grab Bar
The proposed rule specified that the rear grab bar be 24 inches long minimum, centered on the water closet, or at least 36 inches long "where wall space permits" (604.5.2)....
-
609.1 General
Grab bars in toilet facilities and bathing facilities shall comply with 609....
-
609.1 General
Grab bars in toilet facilities and bathing facilities shall comply with 609....
-
609.1 General
Grab bars in toilet facilities and bathing facilities shall comply with 609....
-
11B-609.1 General
Grab bars in toilet facilities and bathing facilities shall comply with Section 11B-609....
-
609.1 General
Grab bars in toilet facilities and bathing facilities shall comply with 609....
-
11B-609.1 General
Grab bars in toilet facilities and bathing facilities shall comply with Section 11B-609....
-
11B-609.1 General
Grab bars in toilet facilities and bathing facilities shall comply with Section 11B-609....
-
2. Rear grab bar
Rear grab bar: There is a grab bar behind the toilet that is at least 36 inches long and from 33 to 36 inches above the floor....
-
1. Side grab bar
Side grab bar: There is a grab bar on the adjacent side wall that is at least 40 inches long and from 33 to 36 inches above the floor....
-
609.4 Side Wall Grab Bar Height
-
609.4 Rear Wall Grab Bar Height
-
Standard Roll-In Type Shower Compartments: ADA Standard Section 608.3.2
Section 608.3.2 covers the current ADA Standards for grab bars in standard roll-in type shower compartments.
-
Bradley Grab Bars 1 1/2" with Concealed Mounting 812
1½" O.D. heavy duty stainless steel grab bar with concealed mounting: Product Materials FLANGES: 3 1/8" dia. 13 gauge stainless steel. ESCUTCHEONS: 22 gauge stainless steel....
-
Just Manufacturing 30" Stainless Steel Grab Bar
Type-304, 18 Gauge Stainless Steel 30" Length x 1-1/2" Diameter with concealed screws Brushed stainless finish Grab bar to wall distance 1-1/2" ADA...
-
Bobrick WingIt Grab Bar Fastener
The WingIt Grab Bar Fastener is made of corrosion resistant stainless steel. Properly installed, this fastener will support 300lbs. (136kg) weight loads....
-
604.8.2.3 Grab Bars
604.8.2.3 Grab Bars. Grab bars shall comply with 609. A side-wall grab bar complying with 604.5.1 shall be provided on both sides of the compartment....
-
11B-809.10.7.3 Reinforcement for grab bars
Reinforcement for grabs bars shall comply with the following: Where water closets are not placed adjacent to a side wall capable of accommodating a grab bar, the bathroom shall...
-
604.5 Grab Bars (Exception 2)
604.5 Grab Bars (Exception 2) Exception 2 to this section permits grab bars to not be installed at water closets in residential dwelling units required to provide mobility features provided...
-
604.9.4 Grab Bars
604.9.4 Grab Bars. Grab bars for water closets shall comply with 604.5....
