A Longitudinal Study of Trail Surfaces Final Report...
Search Results "FTDS: Federal Trail Data Standards"
-
Part I. A Longitudinal Study of Trail Surfaces Final Report
-
Part II. National Trail Surface Survey Final Report
National Trail Surface Survey Final Report...
-
Trail Grade
The ascent or descent of a trail segment expressed as a percentage of its length. When expressed as a ratio of rise to length to the term used is running slope....
-
Protruding Objects and Trails
However, you should follow the specific Trail Management Objectives for each trail that address protrusions, obstacles, and clearing widths and heights....
-
2.0 Methodology
2.0 Methodology We reviewed ICC/ANSI A117.1 (1998) Accessible and Usable Buildings and Facilities, which serves as the model for the technical requirements in the federal guidelines in...
-
II-6.2100 General
They can choose either the Uniform Federal Accessibility Standards (UFAS) or the Americans with Disabilities Act Accessibility Guidelines for Buildings and Facilities (ADAAG), which is the...
-
Passing Spaces on Trails
However, this width is not always appropriate in all settings and for all trail classes....
-
11B-246.7 Trails and paths
Trails, paths and nature walk areas, or portions of them, shall be constructed with gradients permitting at least partial use by wheelchair occupants....
-
11B-246.7 Trails and paths
Trails, paths and nature walk areas, or portions of them, shall be constructed with gradients permitting at least partial use by wheelchair occupants....
-
11B-246.7 Trails and paths
Trails, paths and nature walk areas, or portions of them, shall be constructed with gradients permitting at least partial use by wheelchair occupants....
-
7.4.8 Protruding Objects
Constructed features, including signs, shall not extend into the trail tread more than 4 inches (100 mm) between 27 inches (685 mm) and 80 inches (2030 mm) above the surface of the trail...
-
§8.32(b)
(b) For purposes of this section, section 4.1.6(1)(g) of UFAS shall be interpreted to exempt from the requirements of UFAS only mechanical rooms and other spaces that, because of...
-
Rulemaking History
The ANSI A117.1 standard is a national consensus standard that provides technical requirements for accessible buildings and facilities....
-
IV. Deeming 2010 Standards as an Alternative Accessibility Standard for Section 504 Compliance
In March 2011, pursuant to its coordination authority under Section 504, DOJ advised Federal agencies that until such time as they update their agency’s regulation implementing the Federally...
-
Federal Agencies
Below is a list of the relevant federal agencies....
-
III. Results of the Study
Responses were received from across the country and from a variety of agency types with the majority coming from state/local government and federal entities (Table 7)....
-
Hiker/Pedestrian Trail
A trail with a designed use of hiker/pedestrian that is designed, constructed, and maintained for hiker/pedestrian use. ...
-
11B-105.1 General
See Chapter 35.
-
11B-105.1 General
See Chapter 35.
-
The History of Accessibility Guidelines
Uniform Federal Accessibility Standards (UFAS)— 1984 to 2006. These standards updated and expanded the GSA accessibility guidelines....
-
Federal Agency
Federal Agency....
-
Trail
For purposes of the FSTAG and FSORAG, a trail is a pedestrian route developed primarily for outdoor recreational purposes. ...
-
Standards
Standards Industry Standards ACI 117 - 2006 Standard Specifications for Tolerances for Concrete Construction and Materials ASTM E 380 Standard Practice for the Use of...
-
Trailheads and Trail Facilities
[See subsections ...]