Because an accessible route requires an 80 inch (2030 mm) vertical clearance, care should be taken in selecting lifts as they may not be equally suitable for use by people using wheelchairs...
Search Results "Toe Clearance"
-
11B-410.1 General
-
Just Manufacturing Ledgemount Non-Swivel Gooseneck Concealed Mixing Faucet
Rigid gooseneck spout with 7-3/8" clearance. Replaceable seats. Brass quarter turn quick compression stem units....
-
Rockwood Manufacturing Company 11047 Series 47 Straight Single Bar Set 8" Pull CTC
PULL: CTC: 8" Projection: 3" Clearance: 2" PUSH: Projection: 2-1/2" Clearance: 1-1/2" WEIGHT: 11.5 lbs....
-
Activar Hiawatha 535/509/536/537 Solid 1 inch Diameter Pulls
Material: Aluminum, Brass, Bronze, Stainless Steel CTC: 8", 9", 10", 12" Overall: 9", 10", 11", 13" Projection: 3" Clearance: 2". Optional 2-1/2" clearance upon request....
-
Guardian Barrier-Free WideArea™ Eye/Face Wash GBF1724
Profile of unit is “flattened” to comply with maximum height and knee clearance requirements....
-
A4.2.1(1) Space Requirements for Wheelchairs
Thus, a minimum clear width of 32 in (815 mm) will provide adequate clearance....
-
A4.2.1(1) Space Requirements for Wheelchairs
Thus, a minimum clear width of 32 in (815 mm) will provide adequate clearance....
-
Construction and Manufacturing Tolerances
Grab Bar Diameter and Clearance...
-
F. Consultation with Food and Drug Administration
The FDA-CDRH may develop a guidance document to inform manufacturers how it intends to apply its regulatory authority to clearance or approval of medical devices addressed in the Access...
-
Pass Through Kitchen
Clearances for pass through kitchens address counters, appliances, or cabinets on two opposing sides....
-
Shelf and Outlet
The shelf must provide a vertical clearance of at least 6 inches so that different types of portable TTY devices can be connected....
-
Horizontal Alignment
Horizontal Alignment The minimum clearance to an obstruction that should be provided along a horizontal curve is a function of the stopping sight distance and radius of the curve....
-
Feature 6 - Restrooms
An accessible lavatory has floor space in front so that a wheelchair user can approach it, knee clearance so the person can pull under it, and a lowered top surface height so the person...
-
Common Problems with Toilet Rooms
Ø The sink counter is too high, or there is insufficient knee clearance. Ø The sink has exposed hot water and drain pipes, which can cause serious burns....
-
1011.2.1 Size and Location
The size of the clear ground space is based on the dimensions for maneuvering clearance at clear floor or ground spaces that are confined on all or part of three sides in 305.7 of the Architectural...
-
2.5.1 U.S. Food and Drug Administration
Class I devices typically do not require any form of premarket clearance or approval from the FDA, but the manufacturers are still required to follow the FDA Quality System Regulation (in...
-
Acceleration
This affects calculations for both minimum green time for traffic signals and for pedestrian clearance intervals....
-
Just Manufacturing Classroom Concealed Ledgemount Teardrop Handles Restricted Swing Faucet
High rise spout with 10-5/8" clearance. 70 degree restricted swing spout. Replaceable seats. Brass Quarter turn stem units....
-
Just Manufacturing Concealed Classroom Faucet with High Rise Spout
High rise spout with 10-5/8" clearance. 70 degree restricted swing spout. Replaceable seats. Brass Quarter turn stem units....
-
CRL Jackson 900 Series Floor Mounted Door Closers
The 1/8" (3 mm) collar height Spindle is supplied with the door closer, providing a 5/16" (8 mm) clearance from finished floor to door bottom....
-
226.1 General
However, employers should consider work surfaces that are flexible and permit installation at variable heights and clearances....
-
Landings [§405.7]
Handrails, edge protection, vertical posts and other elements cannot obstruct or overlap the minimum 60” by 60” clearance....
-
4) Medical or health care facilities
Required clearances in rooms exceed ADAAG requirements. No special, less stringent requirements for alterations (§6)....
-
1002.4.4.2 Side Entry
Where wheelchair spaces are entered only from the side, amusement rides shall be designed to permit sufficient maneuvering clearance for individuals using a wheelchair or mobility aid to...
