Besam SW200i-IG in ground swing door operator - superior performance Whether you are designing a modern, architectural masterpiece or preserving the historical integrity of a building...
Search Results "Swing Clear Hinge"
Filters
Commonly Searched Documents
-
Besam SW200i-IG In Ground Swing Door Operator
-
Bradley Recessed Hinged Hood Toilet Tissue Dispenser 5103
Recessed Hinged Hood Non-Controlled Delivery Bright polished Stainless Steel Single Roll (For Dual Roll See Model 5123)...
-
Clear Deck Space
Clear Deck Space The base of the transfer platform must have a clear deck space adjacent to it that is 60 by 60 inches minimum, with a slope not steeper than 1:48 so a person using a...
-
Break Out Opening: ADA Standard Section 404.3.6
Section 404.3.6 covers the current ADA Standards for the break out openings at swinging or sliding doors and gates.
-
406.4.1 Clear height
[DSA-AC] The clear height of vehicle and pedestrian areas required to be accessible shall comply with Chapter 11A or 11B, as applicable. Advisory 406.4.1 Clear height....
-
Attachment J
of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing...
-
Walk-A-Sured Clear Anti-Slip Safety Coating System
apply epoxyProduct can be applied to wood, aluminum, concrete, metal, etc Excellent abrasion resistance Chemical, solvent and water resistant Great for any application where a clear...
-
4.8.3 Clear Width
The minimum clear width of a ramp shall be 36 in (915 mm)....
-
4.8.3 CLEAR WIDTH
The minimum clear width of a ramp shall be 36 in (915 mm)....
-
Attachment H: Modifications to Altered Facilities
Attachment H: Modifications to Altered Facilities
-
M303.3.3.3 Clear Width
The clear width of ramp runs shall be 36 inches (915 mm) minimum....
-
M303.3.3.3 Clear Width
The clear width of ramp runs shall be 36 inches (915 mm) minimum....
-
11B-404.3.6 Break out opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (813 mm) minimum when operated...
-
Clear Floor Space [4.20.2]
Clear Floor Space [4.20.2] Clear floor space at tubs, which is dimensioned according to the approach, may overlap required turning space within the room....
-
A4.16.4 Grab Bars
Fig. A6(a) and (b) show the diagonal and side approaches most commonly used to transfer from a wheelchair to a water closet. Some wheelchair users can transfer from the front of the...
-
A4.16.4 GRAB BARS
Fig. A5(a) and (b) show the diagonal and side approaches most commonly used to transfer from a wheelchair to a water closet. Some wheelchair users can transfer from the front of the...
-
404.2.6 Doors in Series and Gates in Series
The distance between two hinged or pivoted doors in series and gates in series shall be 48 inches (1220 mm) minimum plus the width of doors or gates swinging into the space....
-
5.8.1.1 Clear Platform Size
5.8.1.1 Clear Platform Size. The platform should be a minimum clear width of 32-inches and a minimum clear length of 40-inches....
-
11B-404.2.6 Doors in series and gates in series
The distance between two hinged or pivoted doors in series and gates in series shall be 48 inches (1219 mm) minimum plus the width of doors or gates swinging into the space....
-
11B-405.5 Clear width
The clear width of a ramp run shall be 48 inches (1219 mm) minimum. Exceptions: 1....
