[DSA-AC] A sloped surface designed for launching and retrieving trailered boats and other water craft to and from a body of water....
Search Results "Interior Design"
-
BOAT LAUNCH RAMP
-
PERMANENT
[DSA-AC] Facilities which, are intended to be used for periods longer than those designated in this code under the definition of “Temporary.”...
-
New Provisions for Employee Work Areas
This requirement is limited to relatively sizable, interior work spaces....
-
R204.2 Pedestrian Circulation Paths
The NPRM proposed to define a pedestrian circulation path as a prepared exterior or interior surface provided for pedestrian travel in the public right-of-way. See R105.5....
-
907.2.8 Group R-1
An automatic fire detection system is not required in buildings that do not have interior corridors serving guestrooms and where guestrooms have a means of egress door opening directly to...
-
Verify Framing
Slope, width and headroom of all interior accessible routes. 11B-402 Door opening widths. 11B-404 Maneuvering clearances...
-
2. a. Accessible route into and throughout the facility
An accessible route shall connect at least one accessible entrance of each accessible dwelling unit with those exterior and interior spaces and facilities that serve the accessible dwelling...
-
Verify Framing
Slope, width and headroom of all interior accessible routes. 11B-402 Door opening widths. 11B-404 Maneuvering clearances...
-
§100.203(a)
In the case of a rental, the landlord may, where it is reasonable to do so, condition permission for a modification on the renter agreeing to restore the interior of the premises to the...
-
Tactile and Visual Signs [ADA Standards §216.2, §216.4.1]
(An exit passageway is a horizontal component of an exit that is separated from interior building spaces by fire-resistance-rated construction that leads to the exit discharge or public...
-
Visual Signs [ADA Standards §216.3, §216.4.2, §216.4.3]
Visual Signs [ADA Standards §216.3, §216.4.2, §216.4.3] Signs providing direction to, or information about, interior rooms and spaces must meet visual criteria in the ADA Standards, but...
-
Landscape Forms Inc. Austin Bench Collection
Available backed or backless Selection of interior and exterior woods or aluminum extruded boards....
-
Kawneer North America 1040 Sliding Mall Front Door
The 1040 Sliding Mall Front is a single-track unit with three stacking options – parallel staggered, parallel even and perpendicular 90 degree – for both interior and exterior applications...
-
Qualified Historic Building or Facility
A building or facility that is listed in or eligible for listing in the National Register of Historic Places, or designated as historic under an appropriate State or local law....
-
TRANSFER DEVICE
[DSA-AC] Equipment designed to facilitate the transfer of a person from a wheelchair or other mobility aid to and from an amusement ride seat....
-
TRANSFER DEVICE
[DSA-AC] Equipment designed to facilitate the transfer of a person from a wheelchair or other mobility aid to and from an amusement ride seat....
-
11B-234.1 General
These requirements apply generally to newly designed and constructed amusement rides and attractions....
-
11B-234.1 General
These requirements apply generally to newly designed and constructed amusement rides and attractions....
-
Submerged Depth: ADA Standard Section 1009.2.8
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (455 mm) minimum below the stationary water level....
-
Load and Unload Areas: ADA Standard Section 234.4.1
Section 234.4.1 covers scoping requirements in the current ADA Standards for load and unload areas in existing amusement rides.
-
Clear Floor or Ground Space: ADA Standard Section 1002.5.1
A clear floor or ground space complying with 305 shall be provided in the load and unload area adjacent to the amusement ride seats designed for transfer....
-
BOTTLE FILLING STATION
A fixture that is designed and intended for filling personal use drinking water bottles or containers. Such fixtures can be separate from or integral to a drinking fountain....
-
11B-1009.2.8 Submerged depth
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (457 mm) minimum below the stationary water level....
-
11B-1009.2.8 Submerged depth
The lift shall be designed so that the seat will submerge to a water depth of 18 inches (457 mm) minimum below the stationary water level....
