(Task Order 18 under Project DTFH61-01-C-00049) Authors: James Jenness & Jeremiah Singer May 24, 2006 Prepared for: Federal Highway Administration Washington,...
Search Results "Ramp Surface"
-
Visual Detection of Detectable Warning Materials by Pedestrians with Visual Impairments - Final Report
-
Accessible Boarding Piers
Where boarding piers are provided at boat launch ramps, sections 235.3 and 1003.3.2 of the 2010 Standards require that at least five percent (5%) of boarding piers, but at least one, must...
-
e-ii
Is the running slope (up or down the ramp) no more than 1:12?...
-
§ 38.95(b)(8) Platform entrance ramp
(8) Platform entrance ramp....
-
M303.3.3 Ramped
Changes in level greater than ½ inch (13 mm) high shall be ramped and shall comply with M303.3.3....
-
M303.3.3 Ramped
Changes in level greater than ½ inch (13 mm) high shall be ramped and shall comply with M303.3.3....
-
5.2.2.2 Transfer Surface Depth Recommendation for M302
5.2.2.2 Transfer Surface Depth Recommendation for M302 The Committee recommends a minimum depth requirement of 17 inches for equipment used by patients in seated positions....
-
§ 38.95(c)(5) Slope
Ramps or bridge plates shall have the least slope practicable....
-
Eco-Grip Flooring Video 6 of 8 Epoxy Mastic Application
Eco-Grip Flooring Epoxy Mastic Application
-
Inpro Corporation JointMaster® 925 Fire Barrier System Expansion Joint Systems
The 925 Fire Barrier system meets the “Hose System Test” for masonry and concrete walls. Features & Benefits Economical system for joint widths up to 3"...
-
Inpro Corporation JointMaster® 441 Series-Recessed Mount Expansion Joint
The 441 is a highly modifiable system with varying thicknesses of aluminum or stainless steel cover plates that can meet many project’s loading requirements. Features &...
-
Inpro Corporation JointMaster® 103 Series-VCT Expansion Joint Systems
The unique frame design of the 103 creates a smooth transition over joint for wheeled equipment. Features & Benefits Seals absorb limited serviceable seismic...
-
Inpro Corporation JointMaster® 787 Series Floor Expansion Joint Covers
The integral, high durometer seal of the 787 deters water from entering the system and acts as a noise dampening device. Features & Benefits Seismic capable system...
-
Inpro Corporation JointMaster® 300 Series Recessed Mount Floor Expansion Joint Covers
The patented "no-bump" design makes this product ADA compliant. Features & Benefits Patented "no-bump" configuration ADA compliant Gasketed to...
-
Inpro Corporation JointMaster® 101 Series Floor Expansion Joint Covers
The 101 Series is adaptable to many flooring finishes, including ceramic tile, marble, stone, vinyl, tile and carpet. Features & Benefits: Dual durometer seal...
-
Guidelines for Requirement 2
and passenger loading zones; curb ramps; ramps; stairs; elevator, platform lifts; drinking fountains and water coolers; toilet rooms and bathing facilities, including water closets, toilet...
-
T302.2 Slip Resistant
Walking surfaces shall be slip resistant....
-
1.2.6
1.2.6 When local variations (flatness) in running slope of ramps are measured according to 1.1.13 at least 80% (rounded to the nearest whole number) of the measurements should not exceed...
-
Kee Safety Inc. ADA Safety Handrail Components
ADA Safety Handrail Components Kee® Access Railing System was designed specifically to equip architects, engineers, specifiers, builders, and contractors with the components...
-
Sides of Curb Ramps: ADA Standard Section 406.3
Section 406.3 covers the current ADA Standards for curb ramp flares.
-
Carpet [4.5.3]
Carpeting can significantly increase the amount of force needed to propel a wheelchair over a surface....
-
M301.2.1 Transfer Surface Height
The accessory or installation would result in decreasing the distance between the transfer surface and the surface where the mobility device is located....
-
403.1 General
Walking surfaces that are a part of an accessible route shall comply with 403....
-
403.1 General
Walking surfaces that are a part of an accessible route shall comply with 403....
