Search Results "Platform Height"

• State and Local Documents > Codes and Standards > 2012 Texas Accessibility Standards
  1009.4.2 Height

  The height of the transfer wall shall be 16 inches (405 mm) minimum and 19 inches (485 mm) maximum measured from the deck....

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  1013.3 Height

  1013.3 Height.  Required guards shall not be less than 42 inches (1067 mm) high, measured vertically as follows: 1.     From the adjacent walking surfaces; 2.    ...

• Federal Documents > Technical Assistance > Guide to the ADA Standards
  Other Requirements in the ADA Standards

  Platform Lifts  Platform lifts, where permitted on an accessible means of egress, must have standby power (§207.2).  ...

• Federal Documents > Preamble to Guidelines > 36 CFR Parts 1190 and 1191 ADA and ABA Accessibility Guidelines - Preamble (Discussion of Comments and Changes)
  Height Requirements

  The proposed rule included an exception from the height requirements in 309.3 for special equipment and electrical and communications systems receptacles....

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  1136A.1 Receptacle heights

  1136A.1 Receptacle heights. ...

• State and Local Documents > Codes and Standards > 2012 Florida Accessibility Code
  407.3.3.1 Height

  407.3.3.1 Height....

• Additional Access Publications > Providing Health Care for People with Disabilities: Competency Planning Checklists
  Accessible Medical Equipment

  Scale platforms accommodate large power wheelchairs.         F.5....

• Federal Documents > Technical Assistance > 36 CFR Part 1195 Proposed Accessibility Standards for Medical Diagnostic Equipment - Example Applications of Proposed Standards
  Figure M1: Overview of M301 Diagnostic Equipment for Use by a Patient in a Supine, Prone, or Side-Lying Position

  [See subsections ...]

• Federal Documents > Standards > Uniform Federal Accessibility Standards (UFAS)
  A4.27.3 HEIGHT

  A6 further illustrates mandatory and advisory control mounting height provision for typical equipment....

• Drawings and Possible Solutions > CAD/BIM Details
  Kompan, Inc. Sandboxes and Water Play - M582P - Playworks
  

  Requires the Premium User plan or above. (Login or upgrade your account!)
• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.3.2 Height

  The height of gripping surfaces for standing supports shall be based on the position of the standing supports in relation to the standing surfaces they serve....

• Research and History > Research Documents > Independent Wheelchair Transfers in the Built Environment: How Transfer Setup Impacts Performance Phase 2: Final Report
  Protocol A Heights Obtained

  The transfer heights obtained in protocol A for both sample groups can be seen in tables E4 and E5. Table E4....

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  406.4.1 Clear height

  406.4.1 Clear height.  The clear height of each floor level in vehicle and pedestrian traffic areas shall be not less than 7 feet (2134 mm). Advisory 406.4.1 Clear height.  ...

• State and Local Documents > Codes and Standards > 2012 Florida Accessibility Code
  408.4.3 Platform to Hoistway Clearance

  408.4.3 Platform to Hoistway Clearance. The platform to hoistway clearance shall comply with 407.4.3....

• Federal Documents > Technical Assistance > 2016 ADA CHECKLIST FOR POLLING PLACES
  Section E: Route from Entrance

  . (§ 303.4)         E7 If the route to the voting area has stairs, is a platform lift or elevator provided?...

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.4 Leg Supports

  Leg supports shall provide a method of supporting, positioning, and securing the patient’s legs.

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M301.2 Transfer Surface

  A transfer surface shall be provided and shall comply with M301.2.

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M301.1 General

  Diagnostic equipment that supports patients in a supine, prone, or side-lying position shall comply with M301.  EXCEPTION: Examination chairs complying with M302 that recline to...

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M301.2.3 Size

  The size of the transfer surface shall comply with M301.2.3.1 or M301.2.3.2. The size of transfer surfaces shall be measured from center points of their opposing sides.

• Federal Documents > Preamble to Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment - Preamble
  M301.2.3 Size (Section-by-Section Analysis)

  The MDE NPRM proposed a transfer surface size for diagnostic equipment used in the supine, prone, or side-lying position of 30 inches wide and 15 inches deep minimum. (proposed...

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.2.1.1 Transfer Surface Width

  5.2.1.1 Transfer Surface Width. The transfer surface should be 28 inches wide minimum for equipment used by patients in a supine, side-lying, or prone position.

• Rulemaking Process Documents > Committee Activity and Reports > Recommendations on Standards for the Design of Medical Diagnostic Equipment for Adults with Disabilities, Advisory Committee Final Report
  5.2 Transfer Surface Size for Equipment Used by Patients in Supine, Prone, or Side-Lying Position

  5.2 Transfer Surface Size for Equipment Used by Patients in Supine, Prone, or Side-Lying Position.