Generally maps and models should fall within “the wingspan” (within arm’s reach or a suggested 50” x 30”) to be explored from one spot....
Search Results "Maximum Reach Depth"
Commonly Searched Documents
-
Scale and size
-
11B-203.14 Raised diving boards and diving platforms
An accessible route complying with Division 4 shall be provided to the ground- or floor-level entry points, where provided, of stairs, ladders or other means of reaching the raised elements...
-
11B-804.6.4 Range or cooktop
The location of controls shall not require reaching across burners....
-
11B-804.6.4 Range or cooktop
The location of controls shall not require reaching across burners....
-
610.3.1 Rectangular Seats
The rear edge of a rectangular seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall....
- Q'Straint : Importance and Benefits of QUANTUM Automatic Wheelchair Securement
-
Character Height: ADA Standard Section 703.2.5
Character height measured vertically from the baseline of the character shall be 5/8 inch (16 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter “I”....
-
Minimum Number: ADA Standard Section 239.2
Section 239.2 covers scoping requirements in the current ADA Standards for the minimum number of miniature golf course holes that are required to be accessible.
-
DRIVE-UP ELECTRIC VEHICLE CHARGING STATION
An electric vehicle charging station in which use is limited to 30 minutes maximum and is provided at a location where the electric vehicle approaches in the forward direction, stops in...
-
11B-604.9.5 Flush controls
Hand operated flush controls shall comply with Sections 11B-309.2 and 11B-309.4 and shall be installed 36 inches (914 mm) maximum above the finish floor....
- AquaTrek2 AQ-250PC Aquatic Wheelchair
- AquaTrek2 AQ-350 Aquatic Wheelchair
- AquaTrek2 AQ-150 Child Size Aquatic Wheelchair
-
11B-705.1.1.1 Dome size
Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (22.9 mm) minimum and 0.92 inch (23.4 mm) maximum, a top diameter of 0.45 inch (11.4 mm) minimum and...
-
11B-405.2 Slope
Table 405.2 Maximum Ramp Slope and Rise for Existing Sites, Buildings, and Facilities Slope1 Maximum Rise Steeper than 1:10...
-
11B-604.5.1 Side wall
The side wall grab bar shall be 42 inches (1067 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1372 mm) minimum from the rear wall with...
-
804.6.4 Range or Cooktop
The location of controls shall not require reaching across burners....
-
H. Compensatory Relief for Complainants and Release
The Cantrells and MSHA have reached their own agreement regarding the payment of compensatory damages, and they have agreed to keep that amount confidential as part of the consideration...
-
e-ii
Does the floor area of the elevator car have space to enter, reach the controls, and exit?...
-
A. Slope at Door
without any portion steeper than 1:50 (critical dimension of ´" or less), so persons who use wheelchairs do not roll away from the door when they take their hand off the wheelchair and reach...
-
904.2 Approach
the sales or service counter, locate the accessible counter close to the cash register so that a person using a wheelchair is visible to sales or service personnel and to minimize the reach...
-
5b.
Does the floor area of the elevator car provide space for wheelchair users to enter, reach the controls, and exit the car?...
-
Controls [4.21.5]
Controls [4.21.5] Controls and shower units can be located on any wall but where a folding seat is provided they must be located to be within reach of a person on the seat....
-
Are access key, card, or code entry systems permitted in elevators?
For example, card readers must be located within accessible reach ranges. Non-fixed portions, including keys and access cards issued to users, are not required to comply....