If a bank provides both interior and exterior ATMs, each such installation is considered a separate location....
Search Results "Interior Design"
Filters
Commonly Searched Documents
-
11B-220.1 Automatic teller machines and fare machines
-
11B-404.2.4.3 Recessed doors and gates
Maneuvering clearances for forward approach shall be provided when any obstruction within 18 inches (457 mm) of the latch side at an interior doorway, or within 24 inches (610 mm) of the...
-
11B-1005.3 Edge protection
Extending the deck of the fishing pier or platform 12 inches (305 mm) where the 34 inch (865 mm) high railing is provided is an alternative design, permitting individuals using wheelchairs...
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
GSA Section 508 Tutorials, Guidance, Checklists
GSA staff are required to comply with the provisions of Section 508 and ensure accessibility of online electronic content, including but not limited to websites, web applications,...
-
Minimum Number: ADA Standard Section 234.4.2
Section 234.4.2 covers the most current ADA scoping requirements for the minimum number of wheelchairs spaces, transfer seats or devices at existing amusement rides.
-
11B-407.4.6.2 Buttons
Car control buttons with floor designations shall comply with Section 11B-407.4.6.2. Exception: Reserved....
-
GE Cafe™ Series 30" Free-Standing Gas Double Oven with Convection Range CGS990SETSS
Oven Cooking Modes Convection Bake Convection Roast Oven Rack Features 2 Heavy-Duty and 1 Roller Rack Style Commercial Oven Interior...
-
Transfer Height: ADA Standard Section 1002.5.2
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
[ADA Title III §36.104] 1991 Standards
[ADA Title III §36.104] 1991 Standards means requirements set forth in the ADA Standards for Accessible Design, originally published on July 26, 1991, and republished as Appendix D to this...
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with Section...
-
QUALIFIED HISTORIC BUILDING OR FACILITY
[DSA-AC] A building or facility that is listed in or eligible for listing in the National Register of Historic Places, or designated as historic under an appropriate State or local law....
-
11B-234.4.2 Minimum number
structural or operational characteristics of an amusement ride are altered to the extent that the amusement ride’s performance differs from that specified by the manufacturer or the original design...
-
Yale 1800 Series Flatbar Exit Device
It’s the ideal lever lockset for light commercial and heavy-duty residential applications, which typically include: • Interior offices • Closets • Multi-family housing • Hotels...
-
Yale 4300LN Series Grade 2 Tubular Lever Locks
It’s the ideal lever lockset for light commercial and heavy-duty residential applications, which typically include: • Interior offices • Closets • Multi-family housing • Hotels...
-
Section 36.207 Places of Public Accommodation Located in Private Residences (Preamble, Section-by-Section Analysis)
Thus, the ADA would apply to any door or entry way, hallways, a restroom, if used by customers and clients; and any other portion of the residence, interior or exterior, used by customers...
-
INTRODUCTION
The four standard-setting agencies establish and enforce standards for design, construction, and alteration of particular types of buildings and facilities....
-
Allegion Schlage NDE Series Wireless Lock with ENGAGE™ Technology
The new Schlage® NDE Series wireless lock with ENGAGE™ technology is designed to be easy to install, connect, manage and use....
-
Allegion XceedID® PR10 Proximity Mini-Mullion Reader
Its small, but attractive design mirrors the styling of the aptiQ™ Multi-Technology Reader line-up, and is available in a variety of color options....
-
Wheelchair Storage Space: ADA Standard Section 1002.5.4
Wheelchair storage spaces complying with 305 shall be provided in or adjacent to unload areas for each required amusement ride seat designed for transfer and shall not overlap any required...
-
PLATFORM (WHEELCHAIR) LIFT
[DSA-AC] A hoisting and lowering mechanism equipped with a car or platform or support that serves two landings of a building or structure and is designed to carry a passenger or passengers...
-
Issue 18: What design guidance on accessibility through contrast and signage attributes can be provided in the short term for persons with low vision?
Comment by Greg Knoop (Moderator): Thank you Roberta. And from the clinical corner here – I hear a lot of positive “Hmms” – because this is the appropriate use of an aesthetic. Do...
-
Expert Report of Ken Schoonover, P.E., KMS Associates, Inc. (August 7, 2018)
Sidewalks & Walkways: The cross slopes in the designated accessible routes exceed the maximum slope allowed of 1:48 (1991 ADA Stds 4.3.7; 2010 ADA Stds 403.3)....
