Computing Pathway Roughness Index from Longitudinal Profile Measurements1 1This standard practice is under the jurisdiction of ASTM Committee E17 on Vehicle-Pavement Systems and is the direct...
Search Results "Direction of Travel"
Filters
Commonly Searched Documents
-
APPENDIX D
-
1015.6 Slope
This section requires the slope of the surface of the clear ground space and turning space to not be steeper than 1:48 in any direction....
-
Can handrail extensions wrap or turn?
Handrail extensions must be in the same direction as the stair flight, but continuous handrails can wrap at the inside turn of switchback or dogleg stairways....
-
§ 38.159(d)(1) Design load
Securement systems, and their attachments to vehicles, shall restrain a force in the forward longitudinal direction of up to 2,000 pounds (8,880 N) per securement leg or clamping mechanism...
-
Transfer Supports Location and Configuration M301.3 and M302.3
The shape (contours and curves along length for ergonomics, not cross sectional profile) was kept open to give manufacture flexibility in the design as the direction of positioning (i.e....
-
Pictograms and Symbols of Accessibility [ADA Standards §216.2 , §703.6, §703.7]
Pictograms that provide information about a room or space, including the International Symbol of Accessibility (ISA), or that are included on directional signs must comply with requirements...
-
A. Administrative Corrections
This direct final rule remedies two typographical errors on the ICT Final Rule. ...
-
Section 36.208(a) (Section-By-Section Analysis and Response to Comments)
permit an individual to participate in or benefit from the goods, services, facilities, privileges, advantages and accommodations of the public accommodation, if that individual poses a direct...
-
11B-406.3.2 Turning space
The slope of the turning space in all directions shall be 1:48 maximum. FIGURE 11B-406.3.2 ‡‡ PARALLEL CURB RAMPS...
-
ACCESSIBILITY FUNCTION BUTTON
destination-oriented elevator system that when pressed will activate a series of visual and verbal prompts and announcements providing instruction regarding hall call console operation and direction...
-
1012.5 Slope
The slope of the surface of parking spaces and pull-up spaces shall not be steeper than 1:48 in any direction....
-
1132A.4, Item 5
In buildings containing covered multifamily dwelling units, the floor or landing immediately outside the entry may be sloped up to ¼ inch (6.35 mm) per foot (12 inches) (305 mm), in a direction...
-
1015.6 Slope
The slope of the surface of clear ground spaces and turning spaces shall not be steeper than 1:48 in any direction....
-
C201.3 Access to Functionality (Section-by-Section Analysis)
Section-by-Section Analysis) This section proposes that telecommunications equipment manufacturers ensure that ICT is accessible to, and usable by, individuals with disabilities by providing direct...
-
5.1.8 Slope
The slope of the surface of the clear ground space shall not be steeper than 1:48 in any direction....
-
1012.5 Slope
The slope of the surface of parking spaces and pull-up spaces shall not be steeper than 1:48 in any direction....
-
1015.6 Slope
The slope of the surface of clear ground spaces and turning spaces shall not be steeper than 1:48 in any direction....
-
11B-411.2.1.2.4 Display screen
accessibility function button, the display screen shall display information including but not limited to, operating instructions, user input confirmation, elevator assignment characters, direction...
-
1132A.4, Item 5
In buildings containing covered multifamily dwelling units, the floor or landing immediately outside the entry may be sloped up to ¼ inch (6.35 mm) per foot (12 inches) (305 mm), in a direction...
-
§ 38.159(d)(5) Movement
secured in accordance with manufacturer's instructions, the securement system shall limit the movement of an occupied wheelchair or mobility aid to no more than 2 inches (50 mm) in any direction...
-
11B-411.2.1.2.4 Display screen
accessibility function button, the display screen shall display information including but not limited to, operating instructions, user input confirmation, elevator assignment characters, direction...
-
Wagner Instruments Chatillon® DFE Digital Force Gauge
The same useful firmware features are shared, in addition, the E-DFE provides bi-directional RS232 output for motorized test stand control and computer data collection and graphing....
-
SciFit Inclusive Fitness PRO1 - Upper Body Machine
Color-coded adjustments and Braille locators Adjustable tilt head for all heights and ranges of motion True, adjustable step-through accessibility Bi-directional exercise Iso-Strength...
-
810.5.1 Slope
Rail platforms shall not exceed a slope of 1:48 in all directions....
