Consider work surfaces that are flexible and permit installation at variable heights and clearances....
Search Results "Clearance"
Commonly Searched Documents
-
11B-226.1 General
-
R302.3.2 Shared Use Paths
See AASHTO Guide, 5.2.1 Width and Clearance....
-
Viewing Scopes [1011.2, 1011.3, and 1011.8]
Knee and toe clearance that complies with section 306 of the ABA Standards must be provided under the viewing scope (figure 25)....
-
Exterior Features
Sidewalks not exceeding a 5% slope (with a 2% side slope) Passenger loading zone with zero clearance exterior route for people using mobility devices....
-
11B-226.1 General
Consider work surfaces that are flexible and permit installation at variable heights and clearances....
-
11B-226.1 General
Consider work surfaces that are flexible and permit installation at variable heights and clearances. ◼...
- Pilot Rock AT Series Traditional A-Frame Picnic Table With Steel Braces - Using Recycled Plastic
- Bradley Grab Bars 1 1/2" with Concealed Mounting 812
- PEMKO 5" Heavy Duty Threshold No. 1715
- Hoyer Heavy-Duty Power Lift with Optional Scale
-
References
Floor or ground surface within required maneuvering clearances shall comply with 302. Changes in level are not permitted. 405.4 Floor or Ground Surfaces....
-
Comparison of Single-User Toilet Room Layouts: 1A, 1B, and 1C
A lavatory with knee space can overlap the clear floor space required for the water closet provided that at least 36 inches of clearance is maintained between the side wall next to the water...
-
A) Accessible Parking
requirements as accessible parking spaces for cars and have three additional features for vans: • a wider access aisle (96 inch-wide) to accommodate a wheelchair lift; • vertical clearance...
-
4.4.3 Implications of Mammography Equipment Components
In addition, knee and toe clearance must be adequate to allow the woman to get close enough to the breast platform without her knees or feet hitting parts of the equipment....
-
F226.1 General
Consider work surfaces that are flexible and permit installation at variable heights and clearances....
-
Continuous Width (R302.3) (Section-by-Section Analysis)
Advisory information recommends additional maneuvering clearance at turns or changes in direction, recesses and alcoves, building entrances, and along curved or angled routes, particularly...
-
Questions Posed in the NPRM Regarding Costs and Benefits of Complying With the 2010 Standards (Section-by-Section Analysis)
., side reach, water closet clearances in single-user toilet rooms with in-swinging doors, stairs, elevators, location of accessible routes to stages, accessible attorney areas and witness...
-
Clear Floor Space [4.16.2]
amount of space required at an accessible toilet, not the minimum room size, which must also include turning space, clear floor space at other provided fixtures, door swing and maneuvering clearance...
-
Non-Tactile Signage
contrast · non-glare finish · light/dark contrast · non-glare finish Location · 60" height to centerline on wall at latch side of doors · 80" min. vertical clearance...
-
Mounting Location and Height [4.30.6]
The wheelchair maneuvering clearance required on the pull side of doors should allow adequate space....
-
Car Controls [4.10.12]
elevator code; where they are provided, they must be grouped at the bottom of the panel no lower than 35 inches from the floor Recommendation: consider a minimum 3/16 inch vertical clearance...
-
3.3.13 360-Degree Turn
In the UDI sample, at least one power wheelchair user required a much larger clearance for the 360-degree turn (most likely the person with the “trailer” mentioned previously)....
-
RECOMMENDATIONS
Provide a minimum 24" clearance between any obstruction (e.g., sidewall) and the side of the toilet seat....
-
Identification [§216.5, §502.6]
Signs can be on posts, or where feasible, on walls or suspended from ceilings (an 80” minimum headroom clearance is required at signs suspended above circulation paths (§307.4))....