An expansion, extension, or increase in the gross floor area or height of a building or facility....
Search Results "Head Height"
Filters
Commonly Searched Documents
-
106.5.3 Addition
-
Thresholds at Doorways [4.13.8]
ADAAG specifies a maximum threshold height of ½ inch, but allows a height up to ¾ inch at exterior sliding doors where necessary to prevent water damage....
-
[A] 101.2 Scope
Exception: Detached one- and two-family dwellings and multiple single-family dwellings (townhouses) not more than three stories above grade plane in height with a separate means of egress...
-
101.2 Scope
Exception: Detached one- and two-family dwellings and townhouses not more than three stories above grade plane in height with a separate means of egress, and their accessory structures...
-
M301.3 Transfer Supports
o Rationale: This is to accommodate the articulation that is necessary for the head and back support on stretchers....
-
Test Procedures
ASTM F 1292-99 test specifications (ASTM 1999a) and F355-95 test methods (ASTM 1995) were used at a test drop height of 3.05 m (10.0 ft) and 1.83 m (6.0 ft), respectively....
-
11B-604.5 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped grab bar meeting the dimensional requirements of Sections 11B-604.5.1 and 11B-604.5.2 shall...
-
Sample Size Estimation
Data from the maximum and minimum height transfers from protocol A were used for this analysis....
-
TownSteel THSP179 Standard Duty Spring Hinge
Material Gauge - .134 Adjustable Spring Tension Screw packages - 1/2 Machine Screws (1/2MS) and - All Wood Screws (AWS) Machine screws - Phillips(#3) Flat-head...
-
Addition
An expansion, extension, or increase in the gross floor area or height of a building or facility....
-
Mammography Equipment
The mammography machine will need to adjust to their height and accommodate the space of the wheelchair....
-
Handrails [4.8.5]
The height of a guardrail (to prevent falling off the edge) is not specified by ADAAG; local building codes do, however, commonly regulate the minimum height of a guardrail at 42 inches....
-
Notes
Seat heights for males were typically higher than for females....
-
SUMMARY OF THE 19-INCH RECOMMENDATION
Access Board’s Medical Diagnostic Equipment Technical Advisory Committee discussed transfer surface height extensively....
-
SafePath: Threshold Ramp Installation for MultiFamily Housing for Disability Access
One of the largest violations of Fair Housing Act (FHA) regulations is the treatment or perceived compliance specific to threshold heights. ...
-
11B-703.2.6 Stroke thickness
Stroke thickness of the uppercase letter “I” shall be 15 percent maximum of the height of the character....
-
1132A.4.1, Item 1
Thresholds with a change in height of not more than ¼ inch (6.35 mm) may be vertical....
-
703.2.6 Stroke Thickness
Stroke thickness of the uppercase letter "I" shall be 15 percent maximum of the height of the character....
-
703.2.6 Stroke Thickness
Stroke thickness of the uppercase letter “I” shall be 15 percent maximum of the height of the character....
-
Station platforms
Station platforms must be coordinated with the vehicle floor height. (DOT ADA Standard 810.5.3.)...
-
[A] ADDITION
[DSA-AC] An expansion, extension, or increase in the gross floor area or height of a building or facility....
-
1132A.4.1, Item 1
Thresholds with a change in height of not more than ¼ inch (6.35 mm) may be vertical....
-
ADDITION
[DSA-AC] An expansion, extension or increase in the gross floor area or height of a building or facility....
-
11B-703.2.6 Stroke thickness
Stroke thickness of the uppercase letter “I” shall be 15 percent maximum of the height of the character....
