Exception: Where manual swinging doors and gates comply with Section 11B-404.2 and serve the same means of egress compliance with Section 11B-404.3.6 shall not be required....
Search Results "Compliance Coordinator"
-
11B-404.3.6 Break out opening
-
404.3.6 Break Out Opening
EXCEPTION: Where manual swinging doors and gates comply with 404.2 and serve the same means of egress compliance with 404.3.6 shall not be required....
-
1008.2.6 Ground Surfaces
Ground surfaces must be inspected and maintained regularly to ensure continued compliance with the ASTM F 1951 standard....
-
5. Costs of the Proposed Rule
The Preliminary RIA shows that the proposed standards and guidelines will likely increase compliance costs substantially when first implemented, but will thereafter result in only a small...
-
CASI Accessibility Construction Inspection Checklist
Accessibility Checklist for use by building inspectors as a supplemental tool to assist with on-site inspection of accessibility features and construction elements affecting accessibility compliance...
-
CALBO Accessibility Construction Inspection Checklist
Accessibility Checklist for use by building inspectors as a supplemental tool to assist with on-site inspection of accessibility features and construction elements affecting accessibility compliance...
-
36 CFR Part 1191 ABA Accessibility Guidelines, Outdoor Developed Areas
Billing Code 8150‒01-P ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE BOARD 36 CFR Part 1191 RIN 3014-AA22 Architectural Barriers Act Accessibility Guidelines; Outdoor...
-
Amendments to 49 CFR Part 27
In this interval, the Department expects recipients' compliance with section 504 to look forward to compliance with the ADA provisions....
-
202.5 Alterations to Qualified Historic Buildings and Facilities
EXCEPTION: Where the State Historic Preservation Officer or Advisory Council on Historic Preservation determines that compliance with the requirements for accessible routes, entrances, or...
-
Section 503
For more information on section 503, contact: Office of Federal Contract Compliance Programs U.S. Department of Labor 200 Constitution Avenue, N.W....
-
TECHNICALLY INFEASIBLE
essential part of the structural frame, or because other existing physical or site constraints prohibit modification or addition of elements, spaces, or features which are in full and strict compliance...
-
1.1.4 Appendices
Provisions contained in the appendices of this code shall not apply unless specifically adopted by a state agency or adopted by a local enforcing agency in compliance with Health and Safety...
-
CHAPTER 10 MEANS OF EGRESS
CHAPTER 10 MEANS OF EGRESS ETA Editor's Note Sections from California Building Code Chapter 10 not adopted by Division of the State Architect - Access Compliance (DSA-AC) omitted...
-
Section 36.101 Purpose (Preamble, Section-by-Section Analysis)
prohibits discrimination on the basis of disability by public accommodations, requires places of public accommodation and commercial facilities to be designed, constructed, and altered in compliance...
-
BACKGROUND
BACKGROUND The Division of the State Architect – Access Compliance (DSA–AC) adopts Title 24 CBC code requirements relating to accessibility for persons with disabilities....
-
V. ACTIONS TO REMEDY NONCOMPLIANCE WITH ACCESSIBILITY REQUIREMENTS
Defendants shall make all architectural modifications in compliance with the ADA and its implementing regulation and the 2010 ADA Standards for Accessible Design (“Standards”). ...
-
CHAPTER 9 FIRE PROTECTION SYSTEMS
CHAPTER 9 FIRE PROTECTION SYSTEMS ETA Editor's Note Sections from California Building Code Chapter 9 not adopted by Division of the State Architect - Access Compliance (DSA-AC) omitted...
-
10.3.1(2)
(2) In lieu of compliance with 4.1.3(8), at least one entrance to each station shall comply with 4.14, Entrances....
-
4.7.1 General
In alterations, where a condition for exception in section 1.1 prohibits full compliance with a specific requirement for clear floor or ground space surface, slope, size, or location, the...
-
1) Where the Standard specifically refers to 303
clear that changes in level that comply with either the ¼" maximum vertical rise, the ½" maximum beveled rise with a slope not steeper than 1:2, or changes in level that are ramped in compliance...
-
7. Monitoring
Throughout the term of the Settlement Agreement, the City will provide Class Counsel with regular reports about the City’s compliance with the terms of the Settlement Agreement....
-
11B-703.1.1.2 Inspection
The inspection shall include, but not be limited to, verification that Braille dots and cells are properly spaced and the size, proportion and type of raised characters are in compliance...
-
§ 38.125(a)(2) Exception
The access systems or devices used at a station to which section 37.42 applies must permit compliance with that section....