(1) On accessible routes in public and common use areas, and for primary entry doors to covered units, doors that comply with ANSI 4.13 would meet this requirement....
Search Results "Unit of Measurement"
-
3(1)
-
Blocked, a PSA by the United Spinal Association
Requires the Registered User plan or above. Login!
-
11B-206.2.3 Multi-story buildings and facilities
through 11B-809.4, residential dwelling units with adaptable features complying with Sections 11B-809.6 through 11B-809.12, all common use areas serving residential dwelling units with...
-
(4) Doors to public and common use areas
The final Guidelines continued to provide that on accessible routes in public and common use areas, and for primary entry doors to covered units, doors that comply with ANSI 4.13 meet the...
-
B. Agreement of the Parties
This agreement relates solely to the facts and events alleged in the United States' complaint....
-
Parking sign height measurement technique
502.6 says "Signs shall be 60 inches (1525 mm) minimum above the finish floor or ground surface measured to the bottom of the sign." But which floor or ground surface? ...
-
Wheelchair Work Measurement Method
Wheelchair Work Measurement Method....
- Access Board: Accessible Bathing Facilities Scoping
- Access Board: Protruding Objects - Drinking Fountains
- Access Board: Doors in a Series
- Access Board: Door Opening Force
- Access Board: Obstructed Side Reach
-
A. Measuring Slope and Cross Slope
Use a 24" long builders' level and tape measure. Each of these methods will provide the information you need....
-
11B-604.7.2 Disposal units
Sanitary napkin disposal units, if provided, shall comply with Section 11B-309.4 and shall be wall mounted and located on the sidewall between the rear wall of the toilet and the toilet...
-
11B-604.7.2 Disposal units
Sanitary napkin disposal units, if provided, shall comply with Section 11B-309.4 and shall be wall mounted and located on the sidewall between the rear wall of the toilet and the toilet...
-
Lines of Sight and Dispersion: ADA Standard Section 221.2.3
Section 221.2.3 covers scoping requirements in the current ADA Standards for lines of sight and dispersion of wheelchair spaces in assembly areas.
-
1133A.2, Item 4
4. The centerline of the 30-inch (762 mm) by 48-inch (1219 mm) clear floor space provided for parallel or forward approach shall be aligned with the centerline of the work...
-
1133A.7, Item 1
1. The knee and toe space shall be clear and unobstructed, or removable base cabinets in compliance with Section 1133A.3 shall be provided.
-
1133A.7, Item 1
1. The knee and toe space shall be clear and unobstructed, or removable base cabinets in compliance with Section 1133A.3 shall be provided.
-
1133A.2, Item 4
4. The centerline of the 30-inch (762 mm) by 48-inch (1219 mm) clear floor space provided for parallel or forward approach shall be aligned with the centerline of the work space,...
-
11B-809.8.2 Door opening force
The opening force for primary entry exterior doors and secondary exterior doors shall be 8.5 pounds (38 N) maximum.
-
11B-809.10.6.3 Floor space
A clear maneuvering space 30 inches (762 mm) wide minimum by 48 inches (1219 mm) minimum in length shall be located outside the shower, with the width flush with the control wall and...
-
Requirement 5. Light switches, electrical outlets, thermostats and other environmental controls in accessible locations.
all covered multifamily dwellings with a building entrance on an accessible route shall be designed and constructed in such a manner that all premises within covered multifamily dwelling units...
-
Accessible Means of Egress: ADA Standard Section 207
Section 207 covers scoping requirements in the most current ADA Standards for accessible means of egress.
