lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the raised (load) position...
Search Results "Patient in Prone Position"
Commonly Searched Documents
-
1009.2.4 Seat Height
-
1004.1 Clear Floor Space
Exercise machines and equipment shall have a clear floor space complying with 305 positioned for transfer or for use by an individual seated in a wheelchair....
-
1004.1 Clear Floor Space
Exercise machines and equipment shall have a clear floor space complying with 305 positioned for transfer or for use by an individual seated in a wheelchair....
-
4.33.3* Placement of Wheelchair Locations
EXCEPTION: Accessible viewing positions may be clustered for bleachers, balconies, and other areas having sight lines that require slopes of greater than 5 percent....
-
Road Racing Wheelchairs
Typically, a low seating position is preferred to increase stability and decrease resistance....
-
Can doors swing into required clear floor or ground space?
floor space required at benches in saunas and steam rooms (612.2) clear floor space required at tactile signs, which must be beyond the arc of any door swing between the closed position...
-
4. Obstructions
For fixed route services, a passenger's request for a driver to position the vehicle to avoid obstructions to the passenger's ability to enter or leave the vehicle at a designated stop location...
-
§ 38.83(b)(2)(i) Requirements
., ground, curb, and intermediate positions) normally encountered in the operating environment....
-
§ 38.23(b)(2)(i) Requirements
., ground, curb, and intermediate positions) normally encountered in the operating environment....
-
4. Obstructions
For fixed route services, a passenger's request for a driver to position the vehicle to avoid obstructions to the passenger's ability to enter or leave the vehicle at a designated stop location...
-
§ 38.159(b)(2)(i) Requirements
., ground, curb, and intermediate positions) normally encountered in the operating environment....
-
11B-809.8.3 Door maneuvering clearance.
doors, secondary exterior doors, and required exit doors maneuvering clearances shall be 44 inches (1118 mm) minimum in length measured perpendicular to the face of the door in the closed position...
-
11B-604.8.1.1 Size
The minimum space required in toilet compartments is provided so that a person using a wheelchair can maneuver into position at the water closet....
-
Section 35.160 Communications. (Section-by-Section Analysis)
A companion may be the patient's next-of-kin or health care surrogate with whom hospital personnel must communicate about the patient's medical condition....
-
§ 1194.25(j)(1)
(1) The position of any operable control shall be determined with respect to a vertical plane, which is 48 inches in length, centered on the operable control, and at the maximum protrusion...
-
Car Dimensions and Doors: ADA Standard Section 408.4.1
Section 408.4.1 covers the current ADA Standards for the car dimensions and doors of limited-use/limited-application elevators.
-
Gaps: ADA Standard Section 1002.4.3
Floors of amusement rides with wheelchair spaces and floors of load and unload areas shall be coordinated so that, when amusement rides are at rest in the load and unload position, the vertical...
-
Amusement Ride Seats Designed for Transfer: ADA Standard Section 1002.5
Amusement ride seats designed for transfer shall comply with 1002.5 when positioned for loading and unloading. Advisory 1002.5 Amusement Ride Seats Designed for Transfer....
-
11B-1002.5 Amusement ride seats designed for transfer
Amusement ride seats designed for transfer shall comply with Section 11B-1002.5 when positioned for loading and unloading....
-
D. Department of Justice Activities Related to Health Care Providers and Medical Equipment
., examination tables and chairs, mammography equipment, weight scales); patient lifts and other methods for transferring individuals from their mobility devices to medical equipment; and...
- Automatic Curtain Ltd. Remote Controlled Automatic Roller Shade System I
-
A4.17.3 Size and Arrangement
disabilities who use mobility aids such as walkers, canes or crutches are better able to use the two parallel grab bars in the 36 in (915 mm) wide alternate stall to achieve a standing position...
-
804.6.2 Operable Parts
Bottom-hinged appliance doors, when in the open position, shall not be required to comply with 309.3....
-
§382.143(b)(5)
(5) For crewmembers and other personnel whose employment in any given position commences after May 13, 2009, but before May 13, 2010, by May 13, 2010 or a date 60 days after the date of...