404 except that if the approach is from the push side of the compartment door, clearance between the door side of the compartment and any obstruction shall be 48 inches (1219 mm) minimum measured...
Search Results "Measuring Instrument"
Filters
Commonly Searched Documents
-
11B-604.8.1.2 Doors
-
ASTM
ASTM F 1292 establishes a uniform means to measure and compare characteristics of surfacing materials to determine whether materials provide a safe surface under and around playground equipment...
-
Solutions for Five Common ADA Access Problems at Polling Places
While locating polling places in accessible facilities makes ADA compliance more likely, there may be times when that is not possible and the use of temporary measures to provide access...
-
Title II: Program Accessibility
For example, a county has never taken any measures to make its community center's programs accessible to individuals with disabilities....
-
4.4.1 Overview of Mammography Accessibility Considerations
Ordinarily, the accessibility dimensions are static and are measured from a static element, such as the floor....
-
Running Slope [1017.7.1]
CONSTRUCTION TIP—How is running slope measured? Running slope is often described as a ratio of vertical distance to horizontal distance, or rise to run (figure 9)....
-
R402 Protruding Objects (Section-by-Section Analysis)
signs that are between 685 millimeters (2.25 feet) and 2 meters (6.7 feet) above the finish surface must not overhang pedestrian circulation paths more than 100 millimeters (4 inches) measured...
-
14. Does an employer have to provide reasonable accommodation to enable an employee with a disability to have equal access to information communicated in the workplace to non-disabled employees?
electronic mail) are likely to be ineffective substitutes since electronic mail is used by every employee and there is no effective way to ensure that each one will always use alternative measures...
-
Regulatory Process Matters
The Department's initial regulatory impact analysis measures the incremental benefits and costs of the proposed standards relative to the benefits and costs of the 1991 Standards. ...
-
Reduced scoping for public accommodations, small facilities, and qualified small businesses. (Section-by-Section Analysis)
reflects the determination that, while some requirements make sense for alterations and new construction, in the barrier removal context they might not because of the expense or nature of the measure...
-
Regulatory Process Matters
The Department's initial regulatory impact analysis measures the incremental benefits and costs of the proposed standards relative to the benefits and costs of the 1991 Standards. ...
-
DOT Response
The Department is issuing guidance on counting missed/denied trips, and the Federal Transit Administration can work further with transit providers on appropriate statistical measures....
-
Grab Bars
Figure 56 shows how this is measured....
-
11B-706.1 General
Sound pressure levels (SPL), expressed in decibels, measure output sound volume....
-
Ampetronic CLD1 Compact Small Area & Counter Induction Loop Driver Hearing System
Measuring only 128 x 74 x 35mm and with an output current of 2.4A RMS, the CLD1 is the smallest and highest performance amplifier in it’s class....
-
ADA Helper App
Just grab a tape measure and your phone or tablet and you’ve got everything you need to complete your self-assessment....
-
isUD - Innovative Solutions for Universal Design
The Goals are stated very concisely in terms of measurable outcomes....
-
IndependenceFirst - Milwaukee, WI
IndependenceFirst is proud to be one of the largest CILs in the nation as measured by service offerings, staffing levels, consumers served annually, as well as budget. ...
-
NOTES
Note that height measurement, as defined by the tables and chairs subcommittee, represents the highest point of the transfer surface, inclusive of bolsters, when measuring to the top of...
-
2.8 Effects of Luminance Contrast on Visual Detection and Conspicuity of Detectable Warnings
Reflectance factors for each detectable warning and sidewalk were measured with a Minolta CS-100 Chroma meter and a calibrated white reflectance standard....
-
Can parking signage height be considered a "safe harbor"?
A height of at least 60 inches (measured to the bottom edge) is generally advisable (taking care not to make the sign a protruding object), although a higher height is better for signs at...
-
D. Technical standards for construct validity studies
A selection procedure should then be identified or developed which measures the construct identified in accord with subparagraph (2) above....
-
Section 1630.11 Administration of Tests
This provision does not apply to employment tests that require the use of sensory, manual, or speaking skills where the tests are intended to measure those skills....
-
Prevention of fraud in purchase of accessible seating. (Section-by-Section Analysis)
Such measures also must not impose burdensome requirements upon, nor restrict the rights of, individuals with disabilities....
