All objects that protrude from surfaces or posts into circulation paths shall comply with ADA Standards § 4.4 and a minimum 80 inch vertical clearance shall be provided in walks, halls,...
Search Results "Knee Clearance"
Filters
Commonly Searched Documents
-
EXHIBIT A Required Accessible Elements at QuikTrip Stores
-
Automatic Doors
Provisions in section 404.3 address clear width; maneuvering clearance; thresholds; doors and gates in series; operable parts; break out opening; and revolving doors, gates, and turnstiles...
-
11B-226.1 General
Consider work surfaces that are flexible and permit installation at variable heights and clearances. ◼...
-
Delta Widespread Lavatory Faucet 3552-MPU-DST
indicators Metal pop-up 3/8" compression fittings 2 1/4" max. deck thickness No thick deck kit available 32" minimum InnoFlex supply lines below the deck included Min. 2 1/2" clearance...
-
Protruding Objects
One element of a barrier-free meeting space for participants who are blind or have low vision requires cane-detectable protruding objects and sufficient head clearance....
-
Clear Deck Space
If two bars are provided, the clear deck space must be centered on the 24-inch clearance between the two bars....
-
Adaptability
Rooms need to be designed to provide required clear floor space at fixtures, turning space, and door clearance....
-
M101.3 Equivalent Facilitation
However, the standards include technical criteria for clearance in or around the base of the equipment for lift compatibility to allow the use of a patient lift by patients with disabilities...
-
Just Manufacturing Ledgemount Non-Swivel Gooseneck Concealed Mixing Faucet
Rigid gooseneck spout with 7-3/8" clearance. Replaceable seats. Brass quarter turn quick compression stem units....
-
404 Doors, Doorways, and Gates
operated doors: clarify coverage of gates and the application of this section to manual doors and doorways intended for user passage (404.2) clarify and modify maneuvering clearance...
-
Can access be provided after construction based on need?
accessed through an individual’s private office for his or her exclusive use are not required to be built with certain specifically enumerated access features, such as grab bars and lavatory clearances...
-
§ 38.83(a)(1) General
., lift, ramp or bridge plate) complying with either paragraph (b) or (c) of this section and sufficient clearances to permit at least two wheelchair or mobility aid users to reach areas...
-
Activar Hiawatha 535/509/536/537 Solid 1 inch Diameter Pulls
Material: Aluminum, Brass, Bronze, Stainless Steel CTC: 8", 9", 10", 12" Overall: 9", 10", 11", 13" Projection: 3" Clearance: 2". Optional 2-1/2" clearance upon request....
-
Rockwood Manufacturing Company 11047 Series 47 Straight Single Bar Set 8" Pull CTC
PULL: CTC: 8" Projection: 3" Clearance: 2" PUSH: Projection: 2-1/2" Clearance: 1-1/2" WEIGHT: 11.5 lbs....
-
11B-410.1 General
Because an accessible route requires an 80 inch (2030 mm) vertical clearance, care should be taken in selecting lifts as they may not be equally suitable for use by people using wheelchairs...
-
403 Walking Surfaces
The requirements for walking surfaces derive from existing specifications for accessible routes covering floor or ground surfaces, slope, changes in level, and clearances....
-
T602 Wheelchair Spaces
Because the 2010 NPRM proposed additional maneuvering clearances for wheelchair spaces, this exception was not germane and, therefore, did not appear in the proposed rule....
-
11B-410.1 General
Because an accessible route requires an 80 inch (2030 mm) vertical clearance, care should be taken in selecting lifts as they may not be equally suitable for use by people using wheelchairs...
-
11B-410.1 General
Because an accessible route requires an 80 inch (2030 mm) vertical clearance, care should be taken in selecting lifts as they may not be equally suitable for use by people using wheelchairs...
-
M303.2.1 Orientation (Section-by-Section Analysis)
For example, without knee and toe space beneath an optometrist diopter, the patient cannot look into the lens....
-
4.3 Reach Ranges
They could reach higher but only behind the anterior most plane, e.g. if they had knee space in which to pull their device....
-
A4.2.1(1) Space Requirements for Wheelchairs
Thus, a minimum clear width of 32 in (815 mm) will provide adequate clearance....
-
A4.2.1(1) Space Requirements for Wheelchairs
Thus, a minimum clear width of 32 in (815 mm) will provide adequate clearance....
-
Construction and Manufacturing Tolerances
Grab Bar Diameter and Clearance...
