EXCEPTION: In existing sites, buildings, and facilities, ramps shall be permitted to have running slopes steeper than 1:12 complying with Table 405.2 where such slopes are necessary due...
Search Results "Fixed Table"
Filters
Commonly Searched Documents
-
405.2 Slope
-
407.4.7.2 Keypads
The dot shall be 0.118 inch (3 mm) to 0.120 inch (3.05 mm) base diameter and in other aspects comply with Table 703.3.1....
-
407.4.7.2 Keypads
The dot shall be 0.118 inch (3 mm) to 0.120 inch (3.05 mm) base diameter and in other aspects comply with Table 703.3.1....
-
2. What does the ADA require for accessibility of pools?
One means of entry/exit must be a fixed pool lift or sloped entry; the other entry can be a transfer wall, transfer system, or pool stairs....
-
III-7.5180 Assembly areas
In addition, at least one percent of all fixed seats must be aisle seats without armrests (or with removable armrests) to allow for transfer from a wheelchair....
-
4.3.1 Overview of Imaging Equipment and Regulatory Environment
Generally, this equipment is permanently mounted in a fixed installation within specially designed spaces that must perform specific essential functions, including supporting heavy weight...
-
6.1 Deliberative Process
At its first meeting, the Advisory Committee considered this NPRM recommendation of 17” to 19”, which applied to either fixed or adjustable height transfer surfaces....
-
Oval Window Audio Portable InfoLoop Hearing System
Weighing only 24 ounces and measuring 11" x 10" x 4", this transportable/table-top loop system houses a: Built-in omni-directional microphone Automatic gain control Noise gating...
-
NetCentric Technologies Inc. CommonLook PDF Validator Software
only verify compliance to the checkpoints that can be tested with automation, but also to test elements such as proper reading order, sufficiently descriptive alternative text, accurate table...
-
Stopping Distance
Table 14 shows that the mean perception-reaction time for bicyclists was 0.9 seconds....
-
Make Technology Work for Everyone: introducing digital accessibility
The video is a collaboration between the steering group of Citizens Online’s, Fix the Web project (http://fixtheweb.net/) , the Digital Accessibility Centre (http://digitalaccessibilitycentre.org...
-
11B-802.1.2 Width
It should be noted that although side access to the wheelchair space is allowed, fixed companion seating also must be provided adjacent to each wheelchair space.◼ FIGURE 11B-802.1.2...
-
404.2.4.3 Recessed Doors and Gates
A door can be recessed due to wall thickness or because of the placement of casework and other fixed elements adjacent to the doorway....
-
T704.2.1 Audible and visible notification
Audible and visible notification shall be provided onboard indicating when passengers have requested to disembark at the next stop on the fixed route....
-
404.2.4.3 Recessed Doors and Gates
A door can be recessed due to wall thickness or because of the placement of casework and other fixed elements adjacent to the doorway....
-
11B-411.2.3.2 Car designation signs
Applied plates are acceptable if they are permanently fixed to the jamb....
-
DOT Response
However, the statute imposes a good faith effort requirement for acquiring used vehicles only on fixed-route systems, not demand-responsive systems for the general public....
-
407.4 Key Repeat (Section-by-Section Analysis)
Section-by-Section Analysis) This section proposes to require that, where a keyboard with a key repeat feature is provided, the delay before activation of the key repeat feature must be fixed...
-
R213 Transit Stops and Transit Shelters (Section-by-Section Analysis)
Transit stops in the public right-of-way typically serve fixed route bus systems, including bus rapid transit systems, and light rail transit systems....
-
Wall-Mounted Objects
Fixed elements or barriers can provide detection below objects not required to have knee or toe clearance....
-
Stacks [8.5]
Stacks [8.5] Elements fixed to stacks, such as ladders, cannot reduce the minimum passage width nor should signs or other elements between 27 to 80 inches above the floor project more...
-
407.4.7.2 Keypads
The dot shall be 0.118 inch (3 mm) to 0.120 inch (3.05 mm) base diameter and in other aspects comply with Table 703.3.1....
-
11B-703.8.9 Height above floor
Heights of low resolution variable message sign characters shall comply with Table 11B-703.8.4, based on the size of the characters on the sign....
-
11B-703.8.9 Height above floor
Heights of low resolution variable message sign characters shall comply with Table 11B-703.8.4, based on the size of the characters on the sign....
