Handrails can have circular or non-circular cross-sections, but must have rounded edges. The gripping surface and adjacent surfaces must be free of abrasive or sharp elements....
Search Results "Cross-Aisle"
Filters
Commonly Searched Documents
-
Handrails Along Walking Surfaces [§403.6, §505]
-
§ 38.23(b)(13) Handrails
The handrail shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less...
-
§ 38.95(b)(13) Handrails
The handrail shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less...
-
§ 38.125(b)(13) Handrails
The handrail shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less...
-
§ 38.83(b)(13) Handrails
Handrails shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less than...
-
ADA Veracity ADA Pro Application
You type in keywords (try "parking aisle" or "door landing" or "toilet") and any verbiage under that code will appear....
-
1007.1 Accessible means of egress required
In assembly areas with sloped or stepped aisles, one accessible means of egress is permitted where the common path of travel is accessible and meets the requirements in Section 1028.8, and...
-
Boarding Assistance
for example, you are completely immobile, ask carrier personnel to provide a wheelchair to transport you to and from the gate, a lift (if necessary), and assistance transferring from an aisle...
-
III-7.7000 Alterations
required in alterations (§4.1.6(1)(g)). 3) There are special less stringent requirements for alterations in many other areas, including sales and service counters (§7.2(1)), check-out aisles...
-
Table of Contents
Machines and Fare Machines 708 Two-Way Communication Systems CHAPTER 8: SPECIAL ROOMS, SPACES, AND ELEMENTS 801 General 802 Wheelchair Spaces, Companion Seats, and Designated Aisle...
-
Parking
Standard accessible parking spaces must be at least 8 feet wide and have or share an access aisle that is at least 5 feet wide....
-
EXHIBIT F ADA Maintenance Checklist
ACCESSIBLE PARKING AREA Access aisles must be kept free of obstructions, including snow and ice, to allow customers with disabilities room to get in and out of their vehicles....
-
National Council on Independent Living (NCIL)
The National Council on Independent Living is the longest-running national cross-disability, grassroots organization run by and for people with disabilities....
-
ADA Fast Finder
Web and mobile ready Unlimited searches Standard Search: FREE (Sign up required) Search all Federal Standards Add an additional State Standard Cross...
-
MOCEANS Center for Independent Living, Inc. - Long Branch and Toms River, NJ
We are a non-residential, consumer-controlled, community-based, cross-disability, nonprofit organization that is designed and operated within our local community to provide information,...
-
11B-1008.2.3 Water play components
ground spaces, or turning spaces serving water play components is submerged, compliance with Sections 11B-302 _|Floor or Ground Surfaces|_, 11B-403.3, 11B-405.2 _|Slope|_, 11B-405.3 _|Cross...
-
Public Rights-of-Way
The guidelines would supplement the ADA and ABA accessibility guidelines by adding new provisions for sidewalks, street crossings, and related pedestrian facilities....
-
4. COMMON PATH OF TRAVEL ITEMS
Accessible route components • Walking surfaces dimensions • Running slope of walking surfaces, not to exceed 1:20 (5%) • Running slope of ramps, not to exceed 1:12 (8.33%) • Cross...
-
5.4.9 Interruptions along Transfer Support Gripping Recommendation for M301 and M302
At the point of connection, these features impede the ability to grasp completely around the cross section of the gripping surface....
-
5.4.7 Transfer Support Gripping Surface Clearance Recommendation for M301 and M302
This clearance location is around the cross section of the gripping surface (see Figure 5.4.7). NPRM Proposed Provision: Gripping surface clearance not addressed....
-
F216.13 Trailhead Signs
the signs to include information on the length of the trail or trail segment; surface type; typical and minimum tread width; typical and minimum running slope; and typical and minimum cross...
-
1193.23(b)(3) (Advisory Guidance)
Manufacturers should consult with representatives from a cross-section of disability groups, particularly individuals whose disabilities affect hearing, vision, movement, manipulation, speech...
-
§ 38.77(b)
Handrails shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less than...
-
11B-1008.2.3 Water play components
ground spaces, or turning spaces serving water play components is submerged, compliance with Sections 11B-302 _|Floor or Ground Surfaces|_, 11B-403.3, 11B-405.2 _|Slope|_, 11B-405.3 _|Cross...
