Where stirrups are provided, they shall provide a method of supporting, positioning, and securing the patient’s legs.
Search Results "Character Height (Visual)"
-
M301.3.2 Stirrups
-
5.3.1 Permitted Obstructions to Transfer Sides for M301 and M302
The Committee considered anthropometric data from a research project that examined transfer experience with an adjustable height transfer surface....
-
1011.4 Raised character and Braille exit signs
1011.4 Raised character and Braille exit signs. Tactile exit signs shall be required at the following locations:...
-
1013.4 Raised character and Braille exit signs
1013.4 Raised character and Braille exit signs. Tactile exit signs shall be required at the following locations:...
-
1015.3 Height
Exceptions: For occupancies in Group R-3, and within individual dwelling units in occupancies in Group R-2, guards on the open sides of stairs shall have a height not less than 34...
-
Table Surface Height
Persons with disabilities considered the 34 inch maximum height too high for surfaces used for any length of time....
-
11B-704.4.1 Height
11B-704.4.1 Height. When in use, the touch surface of TTY keypads shall be 34 inches (864 mm) minimum above the finish floor....
-
LowVis Guide: Indoor Navigation for the Visually Impaired
Indoor navigation enables users to find their way around large meeting spaces and to always take shortest routes. Using an iPhone or iPad with voice activation, LowViz Guide...
-
11B-704.4.1 Height
Height of TTY keypads not addressed by 2010 and earlier versions of CBC, or by 1991 ADAAG.]...
-
Exam Tables and Chairs
Exam Tables and Chairs Traditional fixed-height exam tables and chairs (also called treatment tables or procedure tables) are too high for many people with a mobility disability to use...
-
4.25.3 Height
Where the distance from the wheelchair to the clothes rod or shelf exceeds 10 in (255 mm) (as in closets without accessible doors) the height and depth to the rod or shelf shall comply with...
-
Scoping Requirements
The proposed rule provided criteria where characters are both tactile and visual (703.2) and criteria for tactile characters (703.3) and visual characters (703.4) that are provided separately...
-
11B-703.5.7 Stroke thickness
Stroke thickness of the uppercase letter “I” shall be 10 percent minimum and 20 percent maximum of the height of the character. [2010 ADA Standards] 703.5.7 Stroke Thickness....
-
11B-703.5.7 Stroke thickness
Stroke thickness of the uppercase letter “I” shall be 10 percent minimum and 20 percent maximum of the height of the character. [2010 ADA Standards] 703.5.7 Stroke Thickness....
-
ELKAY Filtered EZH2O® Mechanical Surface Mount with Battery-powered visual monitor LMASMB
Push-button activation delivers .5 gpm Battery powered Green Ticker™ counts the quantity of bottles saved from waste Features 500 gallon capacity AquaSentry filtration with battery powered- visual...
-
Guest Rooms
Bed heights for accessible rooms should be between 17-23 inches above the floor Do not have border frame which prevents the wheelchair from being directly next to the mattress....
-
B. The ADA Standards for Accessible Design
Thus, the relevant 2010 Standards address only limited aspects of sales and service counters: the counter's height and length and the required clear floor space based on the available approaches...
-
A4.31.3 Mounting Height
The operator button is located at a height of 46 in (1170 mm) if the coin slot of the telephone is at 54 in (1370 mm)....
-
A4.31.3 MOUNTING HEIGHT
The operator button is located at a height of 46 in (1170 mm) if the coin slot of the telephone is at 54 in (1370 mm)....
-
M301.3.1 Transfer Supports
Transfer surfaces required by M301.2 shall provide transfer supports and shall comply with M305.2.
-
M305.5 Head and Back Support
Where the diagnostic equipment is used in a reclined position, head and back support shall be provided. Where the incline of the back support can be modified while in use, head and...
-
M301.3 Supports
Transfer supports, leg supports, and reclining surfaces shall comply with M301.3.
-
M301.3.3 Head and Back Support
Where the diagnostic equipment is used in a reclined position, head and back support shall be provided and shall comply with M305.5.
-
M305.5 Head and Back Support (Section-by-Section Analysis)
As discussed above in Section V.C.3.c (Section-by-Section Analysis – M301.3.3) and Section V.C.7.c. (Section-by-Section Analysis – M302.3.3), the technical requirements for head and...
