Section 4.33.3 of the 1991 Standards and the 2010 Standards, at sections 402, 403.5.1, 802.1.4, and 802.1.5, require walkways that are part of an accessible route to have a 36-inch minimum...
Search Results "Brand Standards"
Commonly Searched Documents
-
Wheelchair Space Overlap in Assembly Areas
-
Access Aisle
Section 502.3 of the 2010 Standards requires that an accessible route adjoin each access aisle serving accessible parking spaces....
-
BACKGROUND
Access Board to promulgate regulatory standards “setting forth the minimum technical criteria for medical diagnostic equipment used in (or in conjunction with) physician's offices, clinics...
-
Section 36.403 Alterations and Path of Travel (Section-by-Section Analysis)
Proposed § 36.403(a)(1) states that if a private entity has constructed or altered required elements of a path of travel in accordance with the 1991 Standards, the private entity is not...
-
III. Statutory Background
Section 508 of the Rehabilitation Act of 1973, as amended (hereafter, “Section 508”), calls for the Access Board to issue and publish standards setting forth the technical and functional...
-
11B-702.1 General
[2010 ADA Standards] 702.1 General....
-
A. Overview Of The Relevant Statutory And Regulatory Provisions
Appendix A of the 1991 title III regulation5 contains the ADA Standards for Accessible Design (“1991 Standards”) which were based upon the ADA Accessibility Guidelines (1991 ADAAG) published...
- UN Division for Social Policy and Development - Disability
- QuickCaption
-
Side reach (Section-by-Section Analysis)
The 1991 Standards at section 4.2.6 establish a maximum side-reach height of 54 inches. The 2010 Standards at section 308.3.1 reduce that maximum height to 48 inches....
-
Executive Summary
Our findings are compared to those in three other countries and to the current standards in all four countries. Many differences exist in both the standards and research studies....
-
11B-206.4.8 Service entrances
[2010 ADA Standards] 206.4.8 Service Entrances. If a service entrance is the only entrance to a building or to a tenancy in a facility, that entrance shall comply with 404....
-
11B-806.2.3.1 Personal lift device floor space
ETA Editor's Note The clearance prescribed for a personal lift device at CBC 11B-806.2.3.1 is not required by 2010 ADA Standards....
-
11B-406.5.8 Counter slope
[2010 ADA Standards] 406.2 Counter Slope. Counter slopes of adjoining gutters and road surfaces immediately adjacent to the curb ramp shall not be steeper than 1:20....
-
11B-1009.2.6 Footrests and armrests
[2010 ADA Standards] 1009.2.6 Footrests and Armrests. Footrests shall be provided and shall move with the seat....
-
11B-405.9.2 Curb or barrier
ETA Editor's Note CBC requires either a curb or a barrier for edge protection at ramps, and does not recognize the extended floor or ground surface also permitted by 2010 ADA Standards...
-
Section 35.151(d) Scope of Coverage (Section-by-Section Analysis)
The Department is proposing § 35.151(d) to clarify that the requirements established by this section, including those contained in the proposed standards, prescribe what is necessary to...
-
1.1.1 Title
official compilation and publication of the adoption, amendment and repeal of building regulations to the California Code of Regulations, Title 24, also referred to as the California Building Standards...
-
Designing Access Into the Outdoor Environment
The portion of ADA/ABAAG that applies to Federal agencies is also known as the Architectural Barriers Act Accessibility Standards (ABAAS) and is available at http://www.access-board.gov/...
-
Acronyms
ABA—Architectural Barriers Act ABAAS—Architectural Barriers Act Accessibility Standards Access Board—Architectural and Transportation Barriers Compliance Board ADA—Americans with...
-
Guidelines
We do not advocate the adoption of strict standards and rules for the design of tactile exhibits because the type of objects that lend themselves to tactile representation vary so widely...
-
Slip Resistance
However, the standards do not specify a minimum level of slip resistance (coefficient of friction) because a consensus method for rating slip resistance remains elusive....
-
Q. What employers are covered by the ADA, and when is the coverage effective?
The standards to be used under title II for determining whether employment discrimination has occurred depend on whether the public entity at issue is also covered by title I....
-
M201.1 Enforcing Authority
The proposed standards do not include scoping requirements that specify the minimum number of types of accessible diagnostic equipment required in different types of health care facilities...