Ground surfaces located within use zones shall comply with ASTM F 1292 (1999 edition or 2004 edition).
Search Results "Boarding Area"
-
11B-1008.2.6.2 Use zones
-
219 Assistive Listening Systems
[See subsections ...]
-
219.1 General
Assistive listening systems shall be provided in accordance with 219 and shall comply with 706.
-
219 Assistive Listening Systems
219 Assistive Listening Systems
-
219.1 General
219.1 General. Assistive listening systems shall be provided in accordance with 219 and shall comply with 706.
-
1008.2.6.2 Use Zones
1008.2.6.2 Use Zones. Ground surfaces located within use zones shall comply with ASTM F 1292 (1999 edition or 2004 edition) (incorporated by reference, see "Referenced Standards" in...
-
§ 382.38 Seating accommodations
(d) A carrier that does not provide advance seat assignments shall provide seating accommodations for persons described in paragraphs (a) and (c) of this section by allowing them to board...
-
GameTime Merry-Go-All Play Component
Merry-Go-All offers abundant grip/grasp areas to hold onto while riding or while pushing others. The center spin wheel remains stationary....
-
206.2.3 Multi-Story Buildings (Exception 4), F206.2.3 Multi-Story Buildings (Exception 4)
residential dwelling units, an accessible route shall not be required to connect stories where residential dwelling units with mobility features required to comply with 809.2, all common use areas...
-
F207.1 General
Areas of refuge shall not be required in detention and correctional facilities....
-
11B-232.5.1 Cubicles and counters
Exception: The inmate or detainee side of cubicles or counters at non-contact visiting areas not serving holding cells or housing cells required to comply with Section 11B-232 shall not...
-
1009.8.1.1 Visible communication method
[DSA-AC and HCD 1-AC] A button complying with Section 1138A.4 or Sections 11B-205 and 11B-309 in the area of refuge shall activate both a light in the area of refuge indicating that rescue...
-
11B-206.2.1 Site arrival points
(1) Newly constructed or altered streets, roads, and highways must contain curb ramps or other sloped areas at any intersection having curbs or other barriers to entry from a street...
-
General [5.1]/ Access Aisles [5.3]
General [5.1]/ Access Aisles [5.3] Access is required to 5% of fixed or built-in tables distributed throughout dining areas....
-
1009.8.1.1 Visible communication method
[DSA-AC and HCD 1-AC] A button complying with Section 1138A.4 or Sections 11B-205 and 11B-309 _|Operable Parts|_ in the area of refuge shall activate both a light in the area of refuge indicating...
-
Sec.36.604 Preliminary determination
After consultation with the Architectural and Transportation Barriers Compliance Board, the Assistant Attorney General shall make a preliminary determination of equivalency or a preliminary...
-
1007.8.1.1 Visible communication method
[DSA-AC and HCD 1-AC] A button complying with Section 1138A.4 or Sections 11B-205 and 11B-309 _|Operable Parts|_ in the area of refuge shall activate both a light in the area of refuge...
-
Judicial Facilities: ADA Standard Section 231
Section 231 covers scoping requirements in the current ADA Standards for judicial facilities.
-
11B-1008.2.5.3.1 Handrail gripping surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum. Where the shape of the gripping...
-
11B-1008.2.5.3.1 Handrail gripping surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum. Where the shape of the gripping...
-
11B-231.1 General
Judicial facilities shall comply with Section 11B-231.
-
General: ADA Standard Section 231.1
Section 231 of the ADA Standards covers information in the current ADA Standards on scoping requirements for judicial facilities.
-
11B-231 Judicial facilities
[See subsections ...]
-
Handrail Gripping Surfaces: ADA Standard Section 1008.2.5.3.1
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum. Where the shape of the gripping...
