in the rental rehabilitation program shall, subject to the priority in 24 CFR 511.10(l) and in accordance with other requirements in 24 CFR part 511, give priority to the selection of projects...
Search Results "Anthropometry of Wheeled Mobility Project"
Filters
Commonly Searched Documents
-
§8.30 Rental rehabilitation program.
-
E202.3 Federal Contracts
For example, if a contractor is permitted to use money from a contract to acquire a laptop which is used to help create the deliverable for the project, the laptop, itself, is considered...
-
Reach Ranges and Operable Parts
REACH RANGES AND OPERABLE PARTS Forward and side reach 11B-308.2/3 Over projections 11B-308.2.2/3.2...
-
Extensions
Handrail extensions are required on all new ramps but need not project into perpendicular circulation paths in alterations....
-
Reach Ranges and Operable Parts
REACH RANGES AND OPERABLE PARTS Forward and side reach 11B-308.2/3 Over projections 11B-308.2.2/3.2...
-
A4.34.2 MINIMUM REQUIREMENTS
Handicapped people who live in accessible dwelling units of multifamily buildings or housing projects will want to participate in all on-site social activities, including visiting neighbors...
-
Access Aisle: ADA Standard Section 502.3
Section 502.3 covers the current ADA Standards for access aisles.
-
Building Entrance
At least one door at the accessible entrance must have a minimum clear width of 32 inches for a voter who uses a wheelchair or other mobility device to pass through the doorway....
-
Sloped Entries
In most cases, it is not appropriate to submerge personal wheelchairs and mobility devices in water....
-
Choice of Device
Choice of Device People with disabilities have the right to choose whatever mobility device best suits their needs....
-
§ 38.23(d)(4) Orientation
In vehicles in excess of 22 feet in length, at least one securement device or system required by paragraph (a) of this section shall secure the wheelchair or mobility aid facing toward the...
-
DORMA 9000 Series Exit Device
Heavy Duty Exit Device The DORMA 9000 Series heavy-duty exit device provides superior durability while the smooth reduced projection touchbar assembly minimizes catch hazards....
-
232.1 General
(1) New construction of jails, prisons, and other detention and correctional facilities shall comply with the 2010 Standards except that public entities shall provide accessible mobility...
-
§ 37.209 Training and other requirements
include, as appropriate to the duties of particular employees, training in proper operation and maintenance of accessibility features and equipment, boarding assistance, securement of mobility...
-
§ 38.95(a)(1) General
., lift, ramp or bridge plate) complying with either paragraph (b) or (c) of this section; sufficient clearances to permit a wheelchair or mobility aid user to reach a seating location;...
-
ASME: ADA Standard Section 105.2.2
Section 105.2.2 of the ADA Standards cover references to the American Society of Mechanical Engineers (ASME) standards.
-
StormPave Permeable Clay Pavers Installation Video
Requires the Registered User plan or above. Login! -
1.4 Participants
Information about the study was also distributed through email lists, flyers in medical offices and retirement communities, and through personal contacts of orientation and mobility specialists...
-
Clear Width of Circulation Paths and Maneuvering Clearances at Wheelchair Spaces
accessible doorways and wheelchair spaces, as well as maneuvering spaces at wheelchair positions, which, on buses, OTRBs and vans, are typically confined on three sides by seats, side walls, or wheel...
-
11B-802.1.3 Depth
Consideration should be given to the alignment of the wheelchair space and the adjacent companion seat which may require the rear tires of the wheelchair to project behind the back of the...
-
804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware....
-
Q6: Curb Ramp Installation Work on Separate Contract
Q6: Is the curb ramp installation work required to be a part of the Plans, Specifications and Estimate package for an alteration project or can the curb ramp work be accomplished under a...
-
804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware....
-
7.2 General Exceptions
The basis for the determination that General Exception 1 or General Exception 2 apply shall be documented and maintained with the records of the construction or alteration project. ...
