This obligation, however, does not require a public entity to take any action that it can demonstrate would result in a fundamental alteration in the nature of its services, programs, or...
Search Results "Altered Element"
Commonly Searched Documents
-
II-7.1000 Equally effective communication
- Kompan, Inc. Elements Play Structures Carrier ELE400056
-
Section 35.151(k) Detention and correctional facilities (Section-by-Section Analysis)
The 2004 ADAAG established specific requirements for the design and construction and alterations of cells in correctional facilities for the first time....
-
9.5.2(2)(e)
(e) at least one route connecting elements (a), (b), (c) and (d) which a person with mobility impairments can use including minimum clear width of 36 in (915 mm), passing space complying...
-
Safe harbor and other proposed limitations on barrier removal.
One approach, described in the ANPRM as Option I, is to establish a safe harbor with regard to elements in existing facilities that comply with the scoping and technical provisions in the...
-
Site Selection
However, if existing facilities, or parts of them (whether they comply with the older standards or were built before the passage of the ADA) are altered, then the altered areas must comply...
-
How can airline personnel help ensure that passengers with service animals are assigned and obtain appropriate seats on the aircraft?
disability must be honored (see sections 382.83(c) and 382.93) Part 382 does not require carriers to make modifications that would constitute an undue burden or would fundamentally alter...
-
11B-232.2.1.3 Substitute cells
When alterations are made to specific cells, detention and correctional facility operators may satisfy their obligation to provide the required number of cells with mobility features by...
-
11B-232.2.1.3 Substitute cells
When alterations are made to specific cells, detention and correctional facility operators may satisfy their obligation to provide the required number of cells with mobility features by...
-
11B-232.2.1.3 Substitute cells
When alterations are made to specific cells, detention and correctional facility operators may satisfy their obligation to provide the required number of cells with mobility features by...
-
Example 1: With Cooking Facilities
The following is a general analysis of the compliance requirements for these elements. Storage: Must comply with 804.5 and 811....
-
Education's Intent To Revise its Section 504 Regulations To Adopt the 2010 Title II ADA Standards
that Federal agencies that extend Federal financial assistance should revise their Section 504 regulations to adopt the 2010 Standards as Section 504 standards for new construction and alterations...
-
II. GENERAL NONDISCRIMINATION REQUIREMENTS
Failing or refusing to make alterations to QuikTrip Stores in full compliance with 42 U.S.C. § 12183(a)(2), 28 C.F.R. §§ 36.402 - 36.406, and the ADA Standards; d....
-
Utility Sinks
A utility sink is deeper than a standard restroom basin or kitchen sink and can be used to clean large pots or equipment. Usually, utility sinks are provided only in highly developed...
-
Verify Rough Plumbing
VERIFY ROUGH PLUMBING – remember finish material thicknesses! Location of toilet flanges from...
-
Verify Rough Plumbing
VERIFY ROUGH PLUMBING – remember finish material thicknesses! Location of toilet flanges from...
-
§ 38.123(a)(1)
(1) The minimum clear floor area shall be 35 inches by 60 inches. Permanently installed fixtures may overlap this area a maximum of 6 inches, if the lowest portion of the fixture is...
-
§ 35.150 Existing facilities
§ 35.150 Existing facilities. * * * * *
-
8. Amend § 35.150 as follows:
8. Amend § 35.150 as follows: a. Redesignate paragraph (b)(2) as paragraph (b)(3); b. Add the words "or acquisition" after the word "redesign" in the first sentence of...
-
§35.150 Existing facilities
§35.150 Existing facilities.
-
4.1.6(1)(f)
(f) If an escalator or stair is planned or installed where none existed previously and major structural modifications are necessary for such installation, then a means of accessible...
-
404.2.3 Clear Width
In alterations, a projection of 5/8 inch (16 mm) maximum into the required clear width shall be permitted for the latch side stop. 2....
-
404.2.3 Doorways - Clear Width
In alterations, a projection of 5/8 inch (16 mm) maximum into the required clear width shall be permitted for the latch side stop. 2....