between the wheeled mobility device and the piece of medical equipment increased and cautioned against speculating that height differences between the wheeled mobility device and transfer surface...
When the surface is not paved or is not elevated above the natural ground, slopes not steeper than 1:33 (3 percent) shall be permitted where necessary for drainage....
When the surface is not paved or is not elevated above the natural ground, slopes not steeper than 1:33 (3 percent) shall be permitted where necessary for drainage. ...
When the surface is not paved or is not elevated above the natural ground, slopes not steeper than 1:33 (3 percent) shall be permitted where necessary for drainage. ...
5.3.2.1 Transfer Sides Recommendation for Stretchers On stretchers, the transfer surface is oriented along the long dimension of the surface on which patients are in the supine, prone...
Windows [7.2(2)] Alternatives to 36-inch high counters (lowered portions, folding shelves) are recognized since other design considerations (security, use by standees) may make a higher surface...
[See subsections ...]
[See subsections ...]
Cross Slope The cross slopes of gangways, transition plates and floating piers that are part of an accessible route must be designed and constructed to not exceed a maximum of 2...
5.3.3 Transfer Sides for Equipment Used by Patients in Seated Position.
5.3.3.1 Transfer Sides for Exam Chairs with Fixed Footrests. The 17 inch minimum depth and 21 inch minimum width should be located on both sides of examination chairs with a fixed...
At the time this addendum was composed, there were 31 participants enrolled in the phase 2 study at HERL (27 men and 4 women). This group of subjects was compared to all the...
42” a.f.f. (above finished floor) wall-mounted cabinets and counters for tall people. With a remodel, they can be lowered to 32” a.f.f. for wheelchair users 10”...
Where writing desks or tables are provided, a minimum of at least one writing desk or table that complies with 4.32 must be provided. Clear passageways in front of customer service...
Circular Cross Section and Clearance (§505.5, §505.7)
The transfer surface shall be located to provide the ability to transfer from a mobility device onto both long sides of the surface....
If they must be modified, for example, to comply with the maximum work surface height of 34 inches, their noncompliant location (i.e., inside an accessible water closet compartment, or obstructing...
(Significant Changes – Transfer Surface Adjustability), this is a new provision that was added to the final rule in conjunction with the new requirement of a low height range in M301.2.1...
Transfer supports for transfer surfaces complying with M301.2.3.1 and M302.2 shall be located on the short side (length) opposite the transfer side....
keep equipment cool Optional locking front doors can be mounted to swing from the left or right-hand side of the equipment rack Leveling glides keep unit level on uneven surfaces...
How do you build a wheelchair ready to blaze through mud and sand, all for under $200? MIT engineer Amos Winter guides us through the mechanics of an all-terrain wheelchair that's...
