Neoprene seals and a stainless return spring will provide a pre-measured, drip free dispensing system. Valve cannot be removed without taking hex nut off....
Search Results "Measuring Instrument"
Filters
Commonly Searched Documents
-
AJW Architectural Products U1314 34 oz. Unidoor Square Soap Dispenser - Recessed
-
AJW Architectural Products U1304 Series 56 oz. Unidoor Horizontal Liquid Soap Dispenser - Recessed
Neoprene seals and a stainless return spring will provide a pre-measured, drip free dispensing system. Valve cannot be removed without taking hex nut off....
-
Willoughby Industries ETW-1445-BS-HC Toilet for 45-degree Chase Wall
Fixture shall withstand loadings up to 2,000 lbs. with no measurable deflection and loadings up to 5,000 lbs. with no permanent damage....
-
Bradley Contemporary Series Recess Mounted Soap Dispenser 6437
Push-in valve dispenses measured amounts of vegetable or coconut oil liquid soaps, synthetic detergents, and antiseptic solutions with less than 5 lbs. of force. ...
-
AJW Architectural Products US130-A Series US130-A12 12" Exposed Flange, 1.5" Diameter Security Grab Bar - Configuration A
*When measuring and ordering grab bars, remember bars are sized centerline to centerline....
-
Whitehall Mfg. Ligature Resistant Toilet Top Supply On-Floor
This toilet is configured for a floor waste application measuring 10 or 12 inches from the wall. ADA Height and Replacement Toilet are also available....
-
seca 684 r Digital Multifunctional Scale with Integrated RS232 Interface
Just press the SEND key to transmit measurements wirelessly to a seca digital printer with wireless reception or the PC....
-
What Kind Of Documentation Is Sufficient To Support A Request For Testing Accommodations?
A qualified professional’s decision not to provide results from a specific test or evaluation instrument should not preclude approval of a request for testing accommodations where the documentation...
-
5.1 Architectural Barriers Act (ABA).
The applicability of the UFAS may be modified or waived on a case-by-case basis upon application to GSA by the head of the department, agency, or instrumentality of the United States concerned...
-
§35.102 Application
Title II of the ADA extends this prohibition of discrimination to include all services, programs, and activities provided or made available by State and local governments or any of their instrumentalities...
-
§35.102 Application (Section-by-Section Analysis)
Title II of the ADA extends this prohibition of discrimination to include all services, programs, and activities provided or made available by State and local governments or any of their instrumentalities...
-
Breast Platform [M303.4.1]
The final version of the criteria must clarify that there is no need to limit the height of the breast platform since most are already above the 42-inch measurement at the top end....
-
Sub-Committee Summary of Scope for Recommendations
Sub-Committee Summary of Scope for Recommendations Though sometimes avoided, all patients should have their weight taken as it is a basic screening measurement....
-
The Advance Notice of Proposed Rulemaking
preparing a regulatory analysis under the guidance provided in OMB Circular A-4, http://www.whitehouse.gov/omb/circulars/a004/a-4.pdf, Sections D (Analytical Approaches) and E (Identifying and Measuring...
-
[2010 ADAS] 105.2.3 ASTM
ASTM F 1292-99 and ASTM F 1292-04 establish a uniform means to measure and compare characteristics of surfacing materials to determine whether materials provide a safe surface under and...
-
Arriving at the Polling Place: Parking
(See Part 2 of this document for tips on measuring slopes and cross slopes.) Parking requirements are in Section A of the 2016 Checklist found in Part 3 of this document....
-
706.1 General
Sound pressure levels (SPL), expressed in decibels, measure output sound volume....
-
Services and Facilities
Under Title II, a public entity must ensure that its program as a whole is accessible; this may entail removing architectural barriers or adopting alternative measures, such as relocating...
-
Mounting Height and Location
Such signs are to be mounted so that the tactile elements (raised characters and braille) are between 48 to 60 inches high, measured to the baseline of characters. Comment....
-
Toilet Paper Dispensers
This may effectively preclude some dispensers from being located above grab bars in view of the minimum mounting height of grab bars (33 inches, measured to the top of the gripping surface...
-
4. ABSOLUTE DIMENSIONS
In recent projects however, water closet centerline dimensions in newly constructed toilet rooms for adults measured as much as 21" and as little as 15" from the adjacent wall....
-
Ground-Level Accessible Routes
At ground level, objects may not protrude into the 60-inch wide space of an accessible route up to or below the height of 80 inches (2030 mm), measured above the accessible route surface...
-
IMPLICATION OF A 19-INCH MINIMUM STANDARD FOR THE HIGHEST POINT IN THE LOWEST ADJUSTABLE POSITION
Illustration of measurement height at bolsters relative to lower transfer surface...
-
706.1 General
Sound pressure levels (SPL), expressed in decibels, measure output sound volume....
