Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces....
Search Results "Electric Vehicle Charging Space"
Commonly Searched Documents
-
11B-703.2.7 Character spacing
-
1133A.2 Clear floor space
Clear floor space at kitchens shall comply with the following:...
-
1009.6.3 Size
Each area of refuge shall be sized to accommodate two wheelchair spaces that are not less than 30 inches by 48 inches (762 mm by 1219 mm)....
-
Width [4.3.3.] and Passing Space [4.3.4]
However, the minimum width of hallways and corridors is often further determined by ADAAG requirements for clear floor space at elements such as drinking fountains, door maneuvering clearances...
-
Wheelchair Passage Width [4.2.1] and Passing Space [4.2.2]
A minimum width of 30 inches is generally sufficient for stationary space. Additional clearance is needed for maneuvering and sway....
-
Lines of Sight for Wheelchair Spaces
Section 221.2.3 covers dispersion of wheelchair spaces and lines of sight....
-
11B-703.2.8 Line spacing
Spacing between the baselines of separate lines of raised characters within a message shall be 135 percent minimum and 170 percent maximum of the raised character height. [S.H. ...
-
703.5.9 Line Spacing
703.5.9 Line Spacing. Spacing between the baselines of separate lines of characters within a message shall be 135 percent minimum and 170 percent maximum of the character height....
-
§ 38.159(c)(8) Handrails
If provided, handrails shall allow persons with disabilities to grasp them from outside the vehicle while starting to board, and to continue to use them throughout the boarding process,...
-
11B-406.3.2 Turning space
A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....
-
12162(a)(3)(A)(ii) a number of spaces
(ii) a number of spaces...
-
Accessible Ground Surfaces
Accessible Ground Surfaces Ground surfaces along accessible routes, clear floor or ground spaces, and maneuvering spaces, must comply with the American Society for Testing and Materials...
-
Vertical Dispersion: ADA Standard Section 221.2.3.2
Section 221.2.3.2 covers scoping requirements in the current ADA Standards for vertical dispersion in assembly areas.
-
11B-813.2.9 Overlap
Required clear floor spaces, clearance at fixtures, and turning space shall be permitted to overlap....
-
§ 38.125(c)(5) Slope
If the height of the vehicle floor, under 50% passenger load, from which the ramp is deployed is 3 inches or less above the station platform a maximum slope of 1:4 is permitted; if the height...
-
603.2.3 Door Swing
Doors shall not swing into the clear floor space or clearance required for any fixture. Doors shall be permitted to swing into the required turning space. EXCEPTIONS: 1....
-
T215 Communication Features
The scoping provisions for communication features address a number of different areas, including: signs or markers for priority seats, identification of wheelchair spaces and doorways that...
-
T204 Doorways
[See subsections ...]
-
CHAPTER 7: COMMUNICATION FEATURES
[See subsections ...]
-
T704.2 Stop Request Systems
Stop request systems shall comply with T704.3.
-
T302 Walking Surfaces
[See subsections ...]
-
CHAPTER 2: SCOPING REQUIREMENTS
[See subsections ...]
-
§ 37.37(b)
(b) Shuttle systems and other transportation services operated by privately-owned hotels, car rental agencies, historical or theme parks, and other public accommodations are subject...
-
§ 38.107(a)(2)
(2) The height of the water closet shall be 17 inches to 19 inches measured to the top of the toilet seat. Seats shall not be sprung to return to a lifted position.